Anterwell Technology Ltd. |
|
FXMA2102UMX Dual Supply, 2-Bit Voltage Translator / Buffer /
Repeater / Isolator for I2C Applications
Features
Bi-Directional Interface between Any Two Levels: 1.65 V to
5.5 V
Direction Control not Needed
System GPIO Resources Not Required when OE Tied to VCCA
I 2 C 400 pF Buffer / Repeater
I 2 C Bus Isolation
A/B Port VOL = 175 mV (Typical), VIL = 150 mV, IOL = 6 mA
Open-Drain Inputs / Outputs
Accommodates Standard-Mode and Fast-Mode I 2 C-Bus Devices
Supports I2 C Clock Stretching & Multi-Master
Fully Configurable: Inputs and Outputs Track VCC
Control Input (/OE) Referenced to VCCA.
Non-Preferential Power-Up; Either VCC May Be Powered-Up First
Outputs Switch to 3-State if Either VCC is at GND
Tolerant Output Enable: 5 V
Packaged in 8-Terminal Leadless MicroPak™ (1.6 mm x 1.6 mm) and
Ultrathin MLP (1.2 mm x 1.4 mm)
ESD Protection Exceeds: - 8 kV HBM ESD (per JESD22-A114) - 2 kV
CDM (per JESD22-C101)
Description
The FXMA2102 is a high-performance configurable dual-voltage-supply
translator for bi-directional voltage translation over a wide range
of input and output voltages levels. Intended for use as a voltage
translator between I2 C- Bus® complaint masters and slaves. The
device is designed so that the A port tracks the VCCA level and the
B port tracks the VCCB level. This allows for bi-directional A/B
port voltage translation between any two levels from 1.65 V to 5.5
V. VCCA can equal VCCB from 1.65V to 5.5V. The OE pin is referenced
to VCCA. Either VCC can be powered-up first. Internal power-down
control circuits place the device in 3-state if either VCC is
removed. The two ports of the device have automatic direction sense
capability. Either port may sense an input signal and transfer it
as an output signal to the other port.
Absolute Maximum Ratings
Symbol | Parameter | Min. | Max. | Unit |
VCCA, VCCB | Supply Voltage | –0.5 | 7.0 | V |
VIN | DC Input Voltage A Port B Port Control Input (OE) | –0.5 –0.5 –0.5 | 7.0 7.0 7.0 | V |
VO | Output Voltage(2) An Outputs 3-State Bn Outputs 3-State An Outputs Active Bn Outputs Active | –0.5 –0.5 –0.5 –0.5 | 7.0 7.0 VCCA + 0.5V VCCA + 0.5V | V |
IIK | DC Input Diode Current At VIN < 0 V | –50 | mA | |
IOK | DC Output Diode Current At VO < 0 V At VO > VCC | –50 +50 | mA | |
IOH / IOL | DC Output Source/Sink Current | –50 | +50 | mA |
ICC | DC VCC or Ground Current per Supply Pin | ±100 | mA | |
PD | Power Dissipation At 400 KHz | 0.129 | mW | |
TSTG | Storage Temperature Range | –65 | +150 | °C |
ESD | Electrostatic Discharge Capability Human Body Model, JESD22-A114 Charged Device Mode, JESD22-C101 | 8 2 | kV |
Stock Offer (Hot Sell)
Part NO. | Q'ty | MFG | D/C | Package |
LA7838 | 9300 | SANYO | 15+ | SIP |
CXA3834M | 9290 | SONY | 13+ | SOP |
ADCMP601BKSZ-REEL7 | 9225 | AD | 15+ | SC70-6 |
LM4041DIM3X1.2 | 9210 | NSC | 15+ | SOT-23 |
MICRF211AYQS | 9200 | MICREL | 14+ | QSOP-16 |
BT8370KPF | 9175 | CONEXAN | 15+ | QFP80 |
ATMEGA64-16AU | 9125 | ATMEL | 15+ | QFP-64 |
PIC12F635-I/SN | 9100 | MICROCHIP | 14+ | SOP |
BU-63152G3-902 | 9100 | DDC | 14+ | QFP64 |
LAN91C111-NS | 9075 | SMSC | 13+ | QFP-128 |
53398-0771 | 9072 | MOLEX | 15+ | connector |
CY7C64225-28PVXC | 9052 | CYPRESS | 12+ | SOP |
ML53812-2TC | 9050 | OKI | 15+ | QFP |
MAX7313ATG | 9045 | MAXIM | 13+ | QFN |
MAX3223EAP | 9026 | MAXIM | 15+ | SSOP |
MC68HC908JB8FB | 9025 | MOT | 01+ | QFP |
BT169D | 9005 | NXP | 15+ | TO-92 |
ZX5T955GTA | 9000 | ZETEX | 14+ | SOT223 |
ZLLS2000TA | 9000 | ZETEX | 15+ | SOT-23 |
MC68331CFC16 | 9000 | MOT | 13+ | QFP |
AN1431T | 9000 | PANASONIC | 14+ | TO-92 |