SN74HC374N OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS chip in electronics

SN74HC374N OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS chip in electronics

►Eight D-Type Flip-Flops in a Single Package

►High-Current 3-State True Outputs Can Drive up to 15 LSTTL Loads

►Full Parallel Access for Loading

►Package Options Include Plastic Shrink Small-Outline (DB), Small-Outline (DW), Thin Shrink Small-Outline (PW), and Ceramic Flat (W) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) DIPs

description These 8-bit flip-flops feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.

The eight flip-flops of the ’HC374 devices are edge-triggered D-type flip-flops. On the positive transition of the clock (CLK) input, the Q outputs are set to the logic levels that were set up at the data (D) inputs. An output-enable (OE) input places the eight outputs in either a normal logic state (high or low logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without interface or pullup components

absolute maximum ratings over operating free-air temperature range

(unless otherwise noted)‡

STOCK LIST