Active Member
|
[China]
Address: Room 36B1-B2, Building C, Electronics Science & Technology Building Shennan Mid-Road, Shenzhen China
Contact name:Sharon Yang
Anterwell Technology Ltd. |
|
|
STOCK LIST
| LPC11C22FBD48/301 | 3665 | NXP | 15+ | LQFP-48 |
| MWIC930NR1 | 807 | FREESCALE | 16+ | TO-272 |
| XCS05XL-4VQ100C | 422 | XILINX | 12+ | QFP100 |
| LM2737MTC | 3000 | NSC | 14+ | TSSOP-14 |
| XC7K325T-2FFG900I | 155 | XILINX | 15+ | BGA |
| NE5500234-T1 | 17120 | NEC | 16+ | SOT-89 |
| CXL5502M-T4 | 3210 | SONY | 10+ | SOP-16 |
| MAX706CSA | 10000 | MAXIM | 16+ | SOP |
| ATTINY13-20PU | 1300 | ATMEL | 14+ | DIP-8 |
| MBRF1060CT | 17435 | SSG | 16+ | TO-220 |
| MCP9701AT-E/TT | 5704 | MICROCHIP | 16+ | SOT-23 |
| OPA335AIDBVT | 7380 | TI | 16+ | SOT23-5 |
| ATTINY261A-MU | 870 | ATMEL | 14+ | QFN-32 |
| LTC4011CFE#PBF | 6545 | LINEAR | 14+ | TSSOP |
| MAX8997EWW | 9871 | MAXIM | 15+ | BGA |
| MAX6675ISA | 5174 | MAXIM | 14+ | SOP |
| P80C552EBA | 9800 | PHILIPS | 15+ | PLCC |
| MCO500-16IO1 | 882 | IXYS | 15+ | MODULE |
| BTA16-800BW | 10000 | ST | 15+ | TO-220 |
| NTD4909NT4G | 4560 | ON | 16+ | TO-252 |
| P6SMB6.8A | 25000 | ON | 16+ | DO-214 |
| PESD3V3S2UT | 30000 | NXP | 16+ | SOT |
| NCP1200P40 | 10560 | ON | 16+ | DIP |
| MC7805CD2TR4G | 4452 | ON | 16+ | TO-264 |
| MC7818CD2TR4G | 4246 | ON | 16+ | TO-263 |
| ZTX757 | 4500 | ZETEX | 11+ | TO-92 |
| L78L15ACD13TR | 10000 | ST | 15+ | SOP8 |
| PM30RHC060 | 120 | MITSUBISH | 11+ | MOUDLE |
| M24C02-WBN6 | 4647 | ST | 16+ | DIP |
| ZXMP6A13FTA | 9200 | DIODES | 15+ | SOT23 |
| MC14516BCP | 5798 | ON | 16+ | DIP |
| MC14106BCP | 6680 | ON | 16+ | DIP |
| QM200HA-2H | 230 | MITSUBISH | 13+ | MODULE |
This octal bus transceiver is designed for synchronous two-way communication between data buses. The control function implementation minimizes external timing requirements. The device allows data transmission from the A bus to the B bus or from the B bus to the A bus depending upon the logic level at the direction control (DIR) input. The enable input (G) can be used to disable the device so that the buses are effectively isolated.
