Active Member
|
[China]
Address: Room 36B1-B2, Building C, Electronics Science & Technology Building Shennan Mid-Road, Shenzhen China
Contact name:Sharon Yang
Anterwell Technology Ltd. |
|
|
RS1M-13-F fast recovery Rectifier Diode 1.0A SURFACE MOUNT FAST RECOVERY RECTIFIER
Features
Mechanical Data
Case: SMA/SMB
Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0
Moisture Sensitivity: Level 1 per J-STD-020C
Terminals: Lead Free Plating (Matte Tin Finish). Solderable per MIL-STD-202, Method 208
Polarity: Cathode Band or Cathode Notch
SMA Weight: 0.064 grams (approximate)
SMB Weight: 0.093 grams (approximate)
Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
| Characteristic | Symbol | RS1 A/AB | RS1 B/BB | RS1 D/DB | RS1 G/GB | RS1 J/JB | RS1 K/KB | RS1 M/MB | Unit |
Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage (Note 5) | VRRM VRWM VR | 50 | 100 | 200 | 400 | 600 | 800 | 1000 | V |
| RMS Reverse Voltage | VR(RMS) | 35 | 70 | 140 | 280 | 420 | 560 | 700 | V |
Average Rectified Output Current @ TT = 120°C | IO | 1.0 | A | ||||||
| Non-Repetitive Peak Forward Surge Current, 8.3ms single half sine-wave Superimposed on Rated Load | IFSM | 30 | A | ||||||
| Forward Voltage Drop @ IF = 1.0A | VFM | 1.3 | V | ||||||
Peak Reverse Current @ TA = 25°C at Rated DC Blocking Voltage (Note 5) @ TA = 125°C | IRM | 5.0 200 | µA | ||||||
| Reverse Recovery Time (Note 3) | trr | 150 | 250 | 500 | ns | ||||
| Typical Total Capacitance (Note 2) | CT | 15 | pF | ||||||
| Typical Thermal Resistance, Junction to Terminal (Note 1) | RθJT | 20 | °C/W | ||||||
| Operating and Storage Temperature Range | Tj, TSTG | -65 to +150 | °C | ||||||
Notes:
1. Valid provided that terminals are kept at ambient temperature.
2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
3. Reverse recovery test conditions: IF = 0.5A, IR = 1.0A, Irr = 0.25A. See figure 5.
4. RoHS revision 13.2.2003. Glass and high temperature solder exemptions applied.
5. Short duration pulse test used to minimize self-heating effect.
A, B, D, G, J, K, M Suffix Designates SMA Package
AB, BB, DB, GB, JB, KB, MB Suffix Designates SMB Package
Marking Information
