Anterwell Technology Ltd. |
|
Am29F010B
1 Megabit (128 K x 8-bit)
CMOS 5.0 Volt-only, Uniform Sector Flash Memory
DISTINCTIVE CHARACTERISTICS
■ Single power supply operation
— 5.0 V ± 10% for read, erase, and program operations
— Simplifies system-level power requirements
■ Manufactured on 0.32 µm process technology
— Compatible with Am29F010 and Am29F010A device
■ High performance — 45 ns maximum access time
■ Low power consumption
— 12 mA typical active read current
— 30 mA typical program/erase current
— <1 µA typical standby current
■ Flexible sector architecture
— Eight 16 Kbyte sectors
— Any combination of sectors can be erased
— Supports full chip erase
■ Sector protection
— Hardware-based feature that disables/reenables program
and erase operations in any combination of sectors
— Sector protection/unprotection can be implemented
using standard PROM programming equipment
■ Embedded Algorithms
— Embedded Erase algorithm automatically pre-programs and erases the chip or any combination of designated sector
— Embedded Program algorithm automatically programs and verifies data at specified address
■ Erase Suspend/Resume — Supports reading data from a sector not being erased
■ Minimum 1 million erase cycles guaranteed per sector
BLOCK DIAGRAM
PIN CONFIGURATION
A0–A16 = 17 Addresses
DQ0–DQ7 = 8 Data Inputs/Outputs
CE# = Chip Enable
OE# = Output Enable
WE# =Write Enable
VCC = +5.0 Volt Single Power Supply
(See Product Selector Guide for speed options
and voltage supply tolerances)
VSS = Device Ground NC = Pin Not Connected Internally