Active Member
|
[China]
Address: Room 36B1-B2, Building C, Electronics Science & Technology Building Shennan Mid-Road, Shenzhen China
Contact name:Sharon Yang
Anterwell Technology Ltd. |
|
|
1200V 75A PIM Mosfet Power Module IC 7MBR75UB120-50 IGBT Module Driver
7MBR75UB120-50 IGBT MODULE (U series) 1200V / 75A / PIM
Features
. Low VCE(sat)
· Compact Package
· P.C. Board Mount Module
· Converter Diode Bridge Dynamic Brake Circuit
Applications
· Inverter for Motoe Drive
· AC and DC Servo Drive Amplifier
· Uninterruptible Power Supply
Maximum ratings and characteristics
Absolute maximum ratings (Tc=25°C unless otherwise specified)
| Item | Symbol | Conditon | Rating | Unit | |
| Inverter | Collector-Emitter voltage | Vces | 1200 | V | |
| Gate-Emitter voltage | Vges | ±20 | V | ||
| Collector current | Ic | Continuous Tc=25°C Tc=80°C | 75 50 | A | |
| Icp | 1ms Tc=25°C Tc=80°C | 150 100 | |||
| -Ic | 75 | ||||
| -IC pulse | 1 ms | 150 | |||
| Collector power disspation | Pc | 1 device | 275 | W | |
| Brave | Collector-Emitter voltage | Vces | 1200 | V | |
| Gate-Emitter voltage | Vges | ±20 | V | ||
| Collector current | Ic | Continuous Tc=25°C Tc=80°C | 35 25 | A | |
| Icp | 1ms Tc=25°C Tc=80°C | 70 50 | |||
| Collector power disspation | Pc | 1 device | 160 | W | |
| Repetitive peak reverse voltage | Vrrm | 1200 | V | ||
| Converter | Repetitive peak reverse voltage | Vrrm | 1600 | V | |
| Average output current | b | 50Hz/60Hz sine wave | 75 | A | |
| Surge current (Non-Repetitive) L2t (Non-Repetitive) | IFSM l2T | Tj=150°C, 10ms half sine wave | 520 1352 | A2S | |
| Operating junction temperature | Tj | +150 | ℃ | ||
| Storage temperature | Tstg | -40 to +125 | ℃ | ||
| Isolation voltage | between terminal and copper base *2 | Viso | AC : 1 minute | AC2500 | V |
| between thermistor and others *3 | AC2500 | V | |||
| Mounting screw torque | 3.5 *1 | N-M | |||
*1 Recommendable value : 2.5 to 3.5 N·m (M5)
*2 All terminals should be connected together when isolation test will be done.
*3 Two thermistor terminals should be connected together, each other terminals should be connected together and shorted to base plate when isolation test will be done.
