|
[China]
Trade Verify
Address: Yangshan Industrial Park Huishan District Wuxi Jiangsu China
Contact name:Patty
Jiangsu New Heyi Machinery Co., Ltd |
|
Verified Suppliers
|
|
|
35mm - 140mm Chrome Piston Rod Hollow Steel Rod ISO F7 Diameter Tolerance
Detailed Product Description
1. Materialof the goods: CK45, ST52, 20MnV6, 42CrMo4, 40Cr, HY4520,
HY4700
2. Specification length: OD 6mm -
12mm length 1000mm-2000mm
OD 16mm-35mm length 2000mm-4000mm
OD 40mm-220mm length 4000mm-8000mm
OD 250mm-1000mm length 4000mm-8000mm
3. Tensile strength: Not less than 610 N/MM2
4. Yield strength: Not less than 355 N/MM2
5. Advanced inspection apparatus
Detailed Description
1. CHEMICAL COMPOSITION(%)
Material | C% | Mn% | Si% | S% | P% | V% | Ni | Cr% | Mo | Cu |
ck45 | 0.42-0.50 | 0.50-0.80 | 0.17-0.37 | ≤0.035 | ≤0.035 |
| ≤0.25 | ≤0.25 |
| ≤0.25 |
ST52 | ≤0.22 | ≤1.6 | ≤0.55 | ≤0.04 | ≤0.04 | 0.02-0.15 |
|
|
|
|
20MnV6 | 0.17-0.24 | 1.30-1.70 | 0.10-0.50 | ≤0.035 | 0.035 | 0.10-0.20 | ≤0.30 | ≤0.30 |
| ≤0.30 |
42CrMo | 0.38-0.45 | 0.5-0.8 | 0.17-0.37 | ≤0.035 | ≤0.035 | 0.07-0.12 | ≤0.03 | 0.90-1.20 | 0.15-0.25 | ≤0.03 |
40Cr | 0.37-0.45 | 0.50-0.80 | 0.17-0.37 | ≤0.035 | ≤0.035 |
| ≤0.3 | 0.80-1.1 |
| ≤0.03 |
HY4700 | 0.38-0.45 | 1.20 ~1.60 | 0.30~0.50 | ≤0.035 | ≤0.020 | 0.05～0.15 | ≤0.25 | 0.10～0.20 | ≤0.15 | 0.25 |
HY4520 | 0.40 ~0.48 | 0.80 ~1.40 | 0.15 ~0.35 | ≤0.035 | ≤0.035 | ≤0.15 | ≤0.25 | ≤0.25 | ≤0.15 | ≤0.25 |
2. MECHANICAL PROPERTIES
Material | T.S / Rm(MPa) | Y.S / Rel(MPa) | A% |
CHARPY |
CONDITION |
ck45 | 610 | 355 | 16 | >41J | Normalized |
ck45 | 800 | 540 | 20 | >41J | Q+T |
ST52 | 500 | 355 | 22 |
| Normalized |
20MnV6 | 750 | 590 | 12 | >40J | Normalized |
42CrMo4 | 980 | 850 | 14 | >47J | Q+T |
40Cr | 1000 | 800 | 10 |
| Q+T |
3. MICRO ALLOY STEEL
Material | MECHANICAL PROPERTIES | Surface hardness(HBW) | |||||
Rm(MPa) | Rel(MPa) | A% | Z% | KU2(J) |
| ||
HY4700 | Φ35 - Φ100 | 900 - 1100 | ≥650 | ≥16 | ≥35 | ≥39 | 270-340 |
＞Φ100 - Φ140 | 850 - 950 | ≥600 | ≥16 | ≥35 | ≥39 | 270-340 | |
HY4520 | Φ40 - Φ100 | 750 - 900 | ≥520 | ≥19 | ≥40 | ≥39 | 230-290 |
＞Φ100～Φ140 | 750 - 900 | ≥520 | ≥17 | ≥35 | ≥39 | 230-290 | |
|
|
|
|
|
|
|
|
4. SUPPLY CONDITION
Ground and chrome plated
5. CHROME THICKNESS
20 to 30 micron
6. SURFACE ROUGHNESS
Ra≤0.2 micron and Rt≤2 micron
7. TOLERANCES ON DIA
ISO f7 on the diameter
8.OVALITY
Half of the tolerance ISO f7
9. STRAIGHTNESS
≤0.2MM/M
10 .SURFACE HARDNESS
850-1150HV (vickers 100g)
11. COHESION
No craks,breaking or detaching after thermic shock(warming up at 300 celsius degrees
and cooling in water)
12 .POROSITY
Test according to ISO 1456/1458 and result yaluation according to ISO 4540 rating 8-10
13. CORROSION RESISTANCE
Test in natural salt spray according to ASTM B 117-120hours
Results evaluation according to ISO 4540 RATING 7-10
14. WELDABILITY
Good
15. PACKING
Anti rust oil to be applied on material and each rod to be packed in paper sleeve
16. CERTIFICATE
All certificate related with material heat treatment and plating is required
