Black IGBT Power Module Texas Instruments TI ISO1432BDWR

Features for the ISO1432

• Compatible with TIA/EIA-485-A
• PROFIBUS compatible at 5-V bus-side supply
• Bus I/O protection
  • ± 30 kV HBM
  • ±16kV IEC 61000-4-2 Contact discharge
  • ± 4 kV IEC 61000-4-4Electrical fast transient
• Low-EMI 500-kbps, 12 Mbps and 50 Mbps Data Rates
• 1.71-V to 5.5-V logic-side supply (VCC1), 3-V to 5.5-V bus-side supply (VCC2)
• Failsafe receiver for bus open, short, and idle
• 1/8 Unit load up to 256 nodes on bus
• 100-kV/µs (typical) high common-mode transient immunity
• Extended temperature range from –40°C to +125°C
• Glitch-free power-up and power-down for hot plug-in
• Wide-body SOIC-16 package
• Pin compatible to most isolated RS-485 transceivers
• Safety-related certifications:
  • 7071-VPK VIOTM and1500-VPK VIORM (reinforced and basic options) per DINVDE V 0884-11:2017-01
  • 5000-VRMSisolation for 1 minute per UL 1577
  • IEC 60950-1, IEC62368-1, IEC 60601-1 and IEC 61010-1 certifications
  • CQC,TUV, and CSA approvals

Description for the ISO1432

The ISO14xx devices are galvanically-isolated differential line transceivers for TIA/EIARS-485 and RS-422 applications. These noise-immune transceivers are designed to operate in harshindustrial environments. The bus pins of these devices can endure high levels of IEC electrostaticdischarge (ESD) and IEC electrical fast transient (EFT) events which eliminates the need foradditional components on bus for system-level protection. The devices are available for both basicand reinforced isolation (see Reinforced and Basic Isolation Options).

These devices are used for long distance communications. Isolation breaks the ground loopbetween the communicating nodes, allowing for a much larger common mode voltage range. Thesymmetrical isolation barrier of each device is tested to provide 5000 VRMSof isolation for 1 minute per UL 1577 between the bus-line transceiver and the logic-levelinterface.

The ISO14xx devices can operate from 1.71 V to 5.5 V on side 1 which lets the devices beinterfaced with low voltage FPGAs and ASICs. The wide supply voltage on side 2 from 3 V to 5.5 Veliminates the need for a regulated supply voltage on the isolated side. These devices support awide operating ambient temperature range from –40°C to +125°C.