ICL7660AIBAZA-T Charge Pump Switching Regulator IC Positive Or
Negative Fixed -Vin 2Vin 1 Output 45mA 8-SOIC
The ICL7660S and ICL7660A Super Voltage Converters are monolithic
CMOS voltage conversion ICs that ensure significant performance
advantages over other similar devices. They are direct replacements
for the industry standard ICL7660 offering an extended operating
supply voltage range up to 12V, with lower supply current. A
Frequency Boost pin has been incorporated to enable the user to
achieve lower output impedance despite using smaller capacitors.
All improvements are highlighted in the “Electrical Specifications”
section on page 3. Critical parameters are ensured over the entire
commercial and industrial temperature ranges. The ICL7660S and
ICL7660A perform supply voltage conversions from positive to
negative for an input range of 1.5V to 12V, resulting in
complementary output voltages of -1.5V to -12V. Only two
non-critical external capacitors are needed, for the charge pump
and charge reservoir functions. The ICL7660S and ICL7660A can be
connected to function as a voltage doubler and will generate up to
22.8V with a 12V input. They can also be used as a voltage
multipliers or voltage dividers. Each chip contains a series DC
power supply regulator, RC oscillator, voltage level translator,
and four output power MOS switches. The oscillator, when unloaded,
oscillates at a nominal frequency of 10kHz for an input supply
voltage of 5.0V. This frequency can be lowered by the addition of
an external capacitor to the “OSC” terminal, or the oscillator may
be over-driven by an external clock. The “LV” terminal may be tied
to GND to bypass the internal series regulator and improve low
voltage (LV) operation. At medium to high voltages (3.5V to 12V),
the LV pin is left floating to prevent device latchup. In some
applications, an external Schottky diode from VOUT to CAP- is
needed to ensure latchup free operation (see Do’s and Dont’s
section on page 8).
Features
• Ensured Lower Max Supply Current for All Temperature Ranges
• Wide Operating Voltage Range: 1.5V to 12V
• 100% Tested at 3V
• Boost Pin (Pin 1) for Higher Switching Frequency
• Ensured Minimum Power Efficiency of 96%
• Improved Minimum Open Circuit Voltage Conversion Efficiency of
99%
• Improved SCR Latchup Protection
• Simple Conversion of +5V Logic Supply to ±5V Supplies
• Simple Voltage Multiplication VOUT = (-)nVIN
• Easy to Use; Requires Only Two External Non-Critical Passive
Components
• Improved Direct Replacement for Industry Standard ICL7660 and
Other Second Source Devices
• Pb-Free Available (RoHS Compliant)
Applications
• Simple Conversion of +5V to ±5V Supplies
• Voltage Multiplication VOUT = ±nVIN
• Negative Supplies for Data Acquisition Systems and
Instrumentation
• RS232 Power Supplies
• Supply Splitter, VOUT = ±VS
Functional Block Diagram
specification of ICL7660AIBAZA-T
Category | Integrated Circuits (ICs) Power Management (PMIC) Voltage Regulators - DC DC Switching Regulators |
Function | |
Output Configuration | Positive or Negative |
Topology | Charge Pump |
Output Type | Fixed |
Number of Outputs | |
Voltage - Input (Min) | |
Voltage - Input (Max) | |
Voltage - Output (Min/Fixed) | -Vin, 2Vin |
Current - Output | 45mA |
Frequency - Switching | |
Synchronous Rectifier | |
Operating Temperature | |
Mounting Type | |
Package / Case | 8-SOIC (0.154", 3.90mm Width) |
Supplier Device Package | |
ORIGINAL
Our company ensures that each batch of products comes from the
original factory, and can provide original labels and professional
testing agency reports.
PRICE
We provide a variety of quotation channels, and sign the order
contract after negotiation.
TRANSACTION
After communication and agreement, we will guide you to arrange
payment.
DELIVERY CYCLE
Delivery on the same day, generally 5-12 working days, may be
slightly delayed during the epidemic, we will follow up the whole
process.
TRANSPORT
We will choose the appropriate transportation mode according to
your country.
PACKAGING
After communication with you, we will choose the appropriate
packaging method according to the weight of the goods to ensure the
safe delivery of the goods.