JinHang Precision Bearing Co.,Ltd |
|
Two row angular contact ball bearing3324M 120 X 260 X 106mm for cement pump
The ball bearing 3324m belongs to high precision contact ball
bearing that will use cement sugar and other industry machine. The
bearing we had batch stock for customer urgent need them.
We can offer the design drawing service and offer the sample to
test the quality.
We had manufacture the angular contact ball bearing 3324m with size
120*260*106mm for pump equipment. The spare part including one
outer ring and inner ring and ball and brass .the bearing will bear
high load and lower speed. All the dimension tolerance will be meet
the customer machine requirement.
Now the bearing 3324M with brass cage data as following:
name | Double row Angular contact ball bearing |
Bearing type | 3324m |
Bearing size | 120x260x106MM |
Outer dia | 260mm |
Inner dia | 120mm |
Height | 106mm |
The bearing ring material | GCr15 |
The bearing cage material | Brass |
The bearing ball material | GCr15 |
Clearance | C3 C0 |
Manufacture time | In stock |
Package | Wooden case |
Hardness | HR58-62 |
Service | Offer drawing and sample available |
The bearing 3324m actual picture as following:
Angular contact ball bearings
Angular contact ball bearings have high limiting speed, and can
carry radial and axial loads at the same time.
JinHang Precision Bearing Co.,Ltd
1. Single-row angular contact ball bearings
Single-row angular contact ball bearings can only carry pure axial
loads in one direction,and the capacity increases with contact
angle. The nominal contact angles are 15°, 25° and 40°. When the
bearings carry radial loads, the inner and outer rings will be
separated because of additional axial force. They are normally
mounted in pairs.
Single-row angular contact ball bearings have two structures:
separable and non separable, because of more balls in bearings,
high loading capacity and stiffness can be gained.
The basic type of separable angular contact ball bearings is type
S70000. Type SN70000 have separable inner ring, and the inner and
outer rings can be mounted respectively when the installation
conditions are restricted.
2. Double-row angular contact ball bearings
Double-row angular contact ball bearings are nonseparable. They can
carry combined loads which is main in radial and moment loads, and
limit axial displacement of shafts or housings in two directions,
the nominal contact angle is 30°,they have higher stiffness
comparing with single-row bearings. They correspond to a pair of
single-row angular contact ball bearings mounted back to back, but
the width is narrower.Therefore, they are especially suitable for
applications required high stiffness.
Double-row angular contact ball bearings usually have fitting slot,
the side of the raceway without fitting slot must carry main loads
when bearings are in use.
The obliquity is limited between inner and outer rings of
double-row angular contact ball bearings, the permissible slant
angles depend on the internal clearance, dimensions, internal
design, the forces and the moments of the bearings. It must be
ensured that higher additional stress can’t be formed in bearings
when the permissible slant angle is maximum. The bearing life will
be shortened ,the running accuracy will be reduced and the noise
will be increased if there was slant angle between inner and outer
rings.Nylon or brass solid cages are generally used in double-row
angular contact ball bearings.