Flame Retardant Chemistry Lab Furniture FRP Test Table Floor Mounted Structure

Flame Retardant Chemistry Lab Furniture FRP Test Table for Laboratory

Material: FRP materials

Size: L*750/1500*850 mm

Type: Laboratory workbench furniture

General Use: Commercial Furniture

Place of Origin: Guangdong, China

Color: grey white

Frame: Floor Mounted Structure

Worktop: FRP board , Epoxy phenolic resin board, epoxy resin board

MOQ: 2 pcs

Loading Port: Guangzhou,shenzhen

Delivery Terms: EXW,FOB,CIF,CFR

Structure: FRP

Guarantee: 5 Years

Profesional Design: Our lab furniture can design and customize lab furniture with you. you only supply to us your laout , and description of your application. and we will give you designing drawing to you

Product requirements: the internal and external surface of the product shall be bright, smooth and smooth, without falling off, bubbling, indentation and surface scratch, pitting, crack and edge, advanced technology, beautiful and durable.

※ tap requirements: tap must be formed at one time, without seam, smooth inside and outside surface, prevent side leakage of solution and so on.

The bearing capacity of the product is up to 400~500KG, and the thickness of the material after molding is ≥4mm.

There is no additional layer inside the molding products, and the inside and outside materials are the same.

The product density shall reach 1.809g/cm2 and meet the national inspection standard (GB/T 1033.2-2008).

Thermal deformation temperature (1.8mpa) > 180℃, meet the national (GB/T 1634.2-2004) inspection standards.

The horizontal combustion performance reaches HB level and meets the national (GB/T 2408-2008) inspection standard.

The test report of the national testing department with CMA or CNAS qualification meeting the above conditions shall be provided.

※ CNC equipment is molded with depth deviation ≤2mm, height deviation ≤1mm, split seam ≤1.3mm;Drawer sag ≤4.2mm;Perpendicularity of adjacent side: diagonal of table, diagonal of box body 1000mm≤1mm, 2000mm≤1mm, 3000mm≤2mm;Floor balance ≤0.4mm.Door and frame, door and door, door and drawer gap, interval 1-2mm;

Does FRP flame retardant anticorrosion test bench to meet national environmental protection equipment testing institutions chemical performance test: sulfuric acid (98%), hydrochloric acid, nitric acid (37%) (65%), sodium hydroxide (40%), carbon tetrachloride, acetic acid (99%), hydrogen peroxide (3%), sodium sulphide saturated liquid, formaldehyde (37%), phenol, phosphoric acid (85%), hydrofluoric acid (48%), and other 12 chemical testing, test results is no obvious change.

FRP lab bench advantage:

 1. The test bench is made of polymer composite sheet material through high pressure thermosetting of machine and equipment.It has the following characteristics:

Waterproof and anti-condensation, high temperature resistance, anti-scratch and wear resistance, acid and alkali resistance, corrosion resistance, anti-aging, long service life (up to more than 10 years), flame retardant, environmental protection, simple disassembly (can be repeatedly installed and disassembled, will not produce damage and deformation), flexible color matching and other adva

3. tap requirements: tap must be formed at one time, without seam, smooth inside and outside surface, prevent side leakage of solution and so on.

4 .The bearing capacity of the product is up to 400~500KG, and the thickness of the material after molding is ≥4mm.

There is no additional layer inside the molding products, and the inside and outside materials are the same.

The product density shall reach 1.809g/cm2 and meet the national inspection standard (GB/T 1033.2-2008).

Thermal deformation temperature (1.8mpa) > 180℃, meet the national (GB/T 1634.2-2004) inspection standards.

The horizontal combustion performance reaches HB level and meets the national (GB/T 2408-2008) inspection standard.

The test report of the national testing department with CMA or CNAS qualification meeting the above conditions shall be provided.

5. CNC equipment is molded with depth deviation ≤2mm, height deviation ≤1mm, split seam ≤1.3mm;Drawer sag ≤4.2mm;Perpendicularity of adjacent side: diagonal of table, diagonal of box body 1000mm≤1mm, 2000mm≤1mm, 3000mm≤2mm;Floor balance ≤0.4mm.Door and frame, door and door, door and drawer gap, interval 1-2mm;

Does FRP flame retardant anticorrosion test bench to meet national environmental protection equipment testing institutions chemical performance test: sulfuric acid (98%), hydrochloric acid, nitric acid (37%) (65%), sodium hydroxide (40%), carbon tetrachloride, acetic acid (99%), hydrogen peroxide (3%), sodium sulphide saturated liquid, formaldehyde (37%), phenol, phosphoric acid (85%), hydrofluoric acid (48%), and other 12 chemical testing, test results is no obvious change.

FRP lab bench SPECIFICATIONS:

PHOTO: