Lightweight Steel Gas Cylinder Cabinets , laboratory Compressed Gas Storage Cabinet

Steel Laboratory Gas Cylinder Storage Cabients For Chemical Laboratory Use
 
Technical Parameters of Gas Cylinder Cabinet:
 

 
Specifications of Gas Cylinder Cabinet:
 
1. 0.8mm electrolytic sheet metal structure blasting points based on position in Cabinet back, effectively preventing accident hazard control at the same time to a minimum.
2. Epoxy coating both inside and outside of the Cabinet, acid and alkali and organic solvent.
3. With cable fixation cylinders, stability and superior performance.
4. Using a metal handle. Facilitate the smooth opening. 

5. Using three-point linkage, lock control, increase the impact resistance of the door.
6. All steel hinges to ensure smooth opening of the door at the same time in increased firm.
7. Gas cylinders are classified into ordinary type, automatic alarm.
 
Alarm system:
 
This alarm system can be continuous and automatic monitoring indoor gas, acetylene, hydrogen, methane, and other gases that leaked and reached explosive concentrations: minimum 0.1 (LEL)-ceiling 0.25 (LEL) in alert probe sensor will sense that and when, effectively avoid the accident gas manufacture.
* Lights: when the accident occurred, photoelectric alarms;
* Buzzer: when the accident occurred, and audible alarms;
* Ring tone switch: when the alarm sounds agitated this sound can be switched off;
* Exhaust switch: the alarm stops automatically after pressing this switch can exhaust gases in the Cabinet;
* Test switch: test that the warning lamp and buzzer works switches;
* Power switch: cylinder Cabinet power switch;