|
[China]
Trade Verify
Address: 104-604, Building D, Jindao Industrial Park, No. 179 Huizhi Middle Road, Hi-tech Development District, Changsha, Hunan, China.
Contact name:Karl Liang
HUNAN CHARMHIGH ELECTROMECHANICAL EQUIPMENT CO., LTD. |
|
Verified Suppliers
|
|
|
Parameters
| Model | MIX5500D |
| Power supply | AC 220V 50Hz 60W |
| Running speed | First turn:1380RPM； Second turn:600RPM |
| Ability | 500g*2 cans(Can accept solder paste tank M tank diameter φ60-φ67 standard equipment) |
| Display | LED digital display |
| Machine size | W400*D400*H500mm |
| Net weight | 35KG |
The mixer 5500D uses the principle of imitating planetary operation to fully stir the solid and liquid components in the solder paste to achieve a completely consistent density.
It can exhibit better thixotropy in subsequent screen printing and reflow soldering. And welding ability. It can also standardize operations and reduce the chance of solder paste absorbing moisture.
Features
1. Place the machine to the ground that meets the power supply of this equipment, and the ground should be stable.
2. Open the front door lock and lift the top cover of the machine.
3. Place the solder paste can into the can of the machine
4. Please take out the solder paste that needs to be stirred, remove the inner cover of the solder paste, and tighten the cover again.
4.1 If it is necessary to stir two tins of solder paste at the same time each time, the masses should be equal, and the difference should be within 50 grams.
4.2 If only one tin of solder paste is stirred at a time, please load the waste solder paste of the same specification and quality into another fixture to keep it in balance. (Note that the old cans are marked to avoid mixing).
4.3 Open the solder paste jig, put the solder paste can into it, then close the lid, and lock the lid buckle.
If the solder paste tank is not standard equipment, too large or too small, please contact our company.
4.5 After loading the solder paste, make sure that nothing is left in the machine.
5. Close the cover and lock the door lock.
6 Turn on the power switch, if you need to adjust the time, please set the time relay.
7 According to the bright switch, the lighting lights are turned on. If you want to start the machine, you must reset the lighting switch; press the start switch, the machine starts to run, and the lights are also on. When the set time is reached, the motor stops running, and the colored lights are also extinguished at the same time. When the motor is running, press the stop switch, the motor will stop running, and the colored lights will go out at the same time.
8 When the machine is running, if you want to forcibly turn off the power and open the upper cover, be careful not to touch the rotating parts.
Packing List:
1.Machine body 1 set
2.Power cord 1 pcs
Our Service:
This SMT machine will be tested well before ship out.
Tools and manuals are complete included in the package.
Each machine 100% test well before ship out.
The complete machine has a warranty period of 1 year from the time of purchase and lifelong service.
Support as well as a long term factory price supply.
We provide online Q/A and troubleshooting support and technical advice service.
Provide one to one after-sale service.
If you want to get more information ,Please don't hesitate to contact me,we will response you at first time.
Tech support:
Tel:+86 19974864383/0731-85504084
Email:shelleywu@charmhigh.com
one@charmhigh. com
Skype/WhatsApp/WeChat ID :+86 19974864383
website:Http://en.charmhigh.com
