|
[China]
Trade Verify
Address: 104-604, Building D, Jindao Industrial Park, No. 179 Huizhi Middle Road, Hi-tech Development District, Changsha, Hunan, China.
Contact name:Karl Liang
HUNAN CHARMHIGH ELECTROMECHANICAL EQUIPMENT CO., LTD. |
|
Verified Suppliers
|
|
|
Support 15000CPH SMT Pick and Place Machine (CHM-750) for PCB
Prototype and SMT Assembly
CHM-750 Introduction
This is CHM-750, a high-performance pick and place machine of Hunan
Charmhigh Electromechanical Equipment Co., Ltd.
The CHM-750 is characterized by 50 feeder stacks, support for
Yamaha pneumatic feeders and stick feeders with tubular
components,automatic correction to pick components, 4 heads capable
of 360-degree rotation, automatic positioning through
recognition of Mark Point for high mounting accuracy, integrated
operation with built-in industrial computer.
CHM-750 main features
1. Model number: CHM-750
2. Brand: Charmhigh
3. main configuration: type of desktop + 6-head 50 feeders +
automatic calibrate pcb +built-in pc and built-in linux system embedded + closed circuit control engine with
coded + Nine cameras + linear track
4. feeder: yamaha cl feeder/electric feeder (feeders need to
buy separately)
5. pcb area: 400mm*350mm
6. Component: The CHM-750
support 0201/0402/0603～5050/SOT/SOP/QFP/QFN/BGA, etc.
7.Mounting speed:11000cph
Specifications
| CHM-750 Specifications | |
| Dimensions | 1280mm(L)×1190mm(W)×1470mm(H) |
| Weight | 520kg |
| Power Supply | AC220V (50Hz, single phase), 2.8kW |
| Air Supply | 0.5MPa ~0.7MPa |
| Vacuum Generation | Vacuum generator |
| Mounting Head Quantity | 6 |
| Mounting Speed | 15000cph (optimal) |
| Mounting Accuracy | ±50μm@μ±3σ/chip |
| Control Accuracy | 5μm |
| Component Height | 12mm |
| Component Type | 0201/0402/0603～5050/SOT/SOP/QFP/QFN/BGA, etc. (resistor/capacitor/diode/triode/LED/IC, etc.) |
| PCB Thickness | 0.6mm~3.5mm |
| PCB Size | 400mm(L)×350mm(W) |
| PCB Conveying | 3-section-rail automatic conveying |
| Nozzle Change | Automatic nozzle change (19-hole nozzle library) |
| Control System | Built-in industrial computer (Windows 7) equipped with monitor, keyboard, and mouse |
| Drive System | X&Y axis driven by servo motors (Y axis by double motors); adopting flexible S-curve acceleration and deceleration |
| Transmission System | Ball screw + linear guide (Y axis with double screws) |
| Feeding System | 50 Yamaha 8mm standard pneumatic/electric feeder stacks (also suitable for IC tray and stick feeder) |
| Vision System | Snapshot camera×6 (component size applicable: 16mm×16mm); IC camera×1 (component size applicable: 36mm×36mm); Mark camera×2 |
1. Whether the linear guide rail and round rod have an impact on
the accuracy of the SMT pick and place machine ?
No impact at all .Using linear guide rail or round rod has no
effect on the accuracy of the mounting machine, the precision of
the mounting machine depends on the motor and software control
system used by the mounting machine only.
2. Is the software control system of your desktop SMT independently
developed by your company?
Yes, our desktop SMT uses Linux system. Linux system supports
cross-platform hardware support, rich software support, reliable
security and stability.
3. Do you use electromagnetic coil to control the pulling needles?
What are the advantages if comparing to cylinder control?
Yes, the drawing needle we use is controlled by the electromagnetic
coil. Comparing with the cylinder control, the electromagnetic coil
control has the characteristics of faster response, softer force
and less noise. The quick reaction can speed up the mounting speed;
Soft strength refers to the strength of the pull needle is soft
when pressing down, and the pull needle is not easy to break.
Placement Effect
Our Service
The machine has a warranty period of 1 year from the time of purchase and lifetime service.
Each machine 100% test well before ship out.
Support as well as a long term factory price supply.
We provide online Q/A and troubleshooting support and technical advice service.
Provide one to one after-sale service.
