|
[China]
Trade Verify
Address: 104-604, Building D, Jindao Industrial Park, No. 179 Huizhi Middle Road, Hi-tech Development District, Changsha, Hunan, China.
Contact name:Karl Liang
HUNAN CHARMHIGH ELECTROMECHANICAL EQUIPMENT CO., LTD. |
|
Verified Suppliers
|
|
|
| CHM-T510LP4Specifications | |
| Dimensions | 2060mm(L)×605mm(W)×700mm(H) |
| Weight | 145kg |
| Power Supply | AC220V (50Hz, single phase)/AC110V (60Hz, single phase);400W |
| Air Supply | 0.5MPa ~0.7MPa |
| Vacuum Generation | Built-in vacuum pump |
| Mounting Head Quantity | 4 |
| Mounting Speed | 11000cph(optimalwithout vision detection); 5500cph (optimal with vision detection) |
| Control Accuracy | 0.015mm |
| Component Type | 0402/0603～5050/SOT/SOP/QFP/QFN/BGA, etc. (resistor/capacitor/diode/triode/LED/IC, etc.) |
| PCB Thickness | 0.6mm~3.5mm |
| PCB Size | 10mm(L)×10mm(W)～1200mm(L)×240mm(W) |
| PCB Conveying | Manual operation |
| Nozzle Change | Manual operation |
| Control System | Built-in computer (embedded Linux operating system), 7-inch touch screen |
| Drive System | X&Y-axisdriven by stepping motors in the way of closed-loop control; Z-axis capable of reset detection;all motors adopting flexible S-curve acceleration and deceleration |
| Transmission System | Synchronous belt+linear guide |
| Feeding System | 8 Yamaha standard pneumatic feeder stacks, Yamaha electric feeder supported |
| Vision System | Up-looking camara for component automatic calibration (component size applicable: 22mm×22mm); down-looking camera for PCB calibration via Mark Point and component positioning |
Machine description:
CHM-T510LP4 is an professional LED design pick and place machine. with 1.2M moving table, it has 4heads and 8pcs Yamaha feeders.
This machine is not only for LED patching work, also can work with 0402. 0603, 0805-5050, SOP, QFN, LQFP, Diode, Transistor.
within embedded industry PC and Linux system. the main board of the machine was developed by ourselves, with good quality and long lifetime. Please buy with confidence.
Automatic of EX axis
High speed movement can assemble a PCB of 1200mm length
High speed movement, highly accurate
Magnetic plate positioning
Check make point visually and automatically, effective and accurate
EX axis covered by magnetic plate, can suitable for various PCB of different size and shape, precise positioning, good performance, easy operation
8pcs Yamaha pneumatic feeder supported
simple & convenient operation
CHM-T510LP4 work with standard Yamaha pneumatic feeder ,it is more stable and longer lifetime. pneumatic feeders can improve the working efficient a lot.
Closed-loop Motion Control System
it can be four-axis linkage, move faster and smoothly. both nozzle can working together, not single nozzle working any more, support single step. X,Y axis encoder installed, never lose step. Flexible S accelerate and decelerate, make sure high speed placement working perfectly.
Z Axis Detection
Z axis detection function can self-checking the height and angle
during placement.
Make sure machine work perfectly with different kinds of
components.
9 kinds of Juki nozzles supported, magnet inside, you can change the nozzle by hand, no need wrench, very convenient.
Industry Touch Screen
Machine uses embedded Linux operation system, This system runs stable with strong compatibility and powerful function. Machine has a in-build 7 inch full touch screen, external USB mouse also accepted. Very easy and convenient operation. You can get a quick start within half an hour.
Package Weight: 190.0kg
Package Size: 137cm x 81cm x 82cm
Packing: wooden case (safe packing)
Our company Hunan Charmhigh Electromechanical Equipment Co., Ltd. is located in the Changsha High-tech Development Zone, covering a total area of 3600 square meters ,with more than 100 employees here.
As a professional modern science and technology enterprise capable of both R&D, production and marketing, Charmhigh has been leading the way in SMT technology for more than ten years.
Different series of multi-head full-automatic SMT machines have been developed and manufactured by Charmhigh to meet various practical production needs.
In accordance with the business philosophy of “Customer First, Innovation Paramount”, Charmhigh has enjoyed high fame at home and abroad.
If you have interest in our products please kindly contact me I will give you immediate reply .
Thanks & best regards
Ellen Meng
Hunan Charmhigh Electromechanical Equipment Co., Ltd.
Add.:104-604,Building D,Jingrong Tongxin International Industrial Park(jindao Park),NO 179 ,Huizhi Middle Road,HI-TECH Development Zone,Changsha ,Hunan,P.R.China
Tel:0086-731-85504084 Fax:0086-731-85504064
Cell/wechat/whatsapp/skype:0086-18974948067
www.charmhigh.com
