|
[China]
Trade Verify
Address: 104-604, Building D, Jindao Industrial Park, No. 179 Huizhi Middle Road, Hi-tech Development District, Changsha, Hunan, China.
Contact name:Karl Liang
HUNAN CHARMHIGH ELECTROMECHANICAL EQUIPMENT CO., LTD. |
|
Verified Suppliers
|
|
|
Charmhigh CHM-T48VB Pick And Place Machine SMT Production Line For PCB Prototype
This type of production line is suitable for company's small batch production & R&D institute to make small batch samples electronic products and all different kinds of SMD. One of the most popular assembly.
| CHM-T48VBSpecifications | |
| Dimensions | 1310mm(L)×710mm(W)×340mm(H) |
| Weight | 49kg |
| Power Supply | AC220V (50Hz, single phase) /AC110V (60Hz, single phase); 300W |
| Air Supply | No external air supply required |
| Vacuum Generation | Built-in vacuum pump |
| Mounting Head Quantity | 2 |
| Mounting Speed | 6000cph(optimalwithout vision detection); 4000cph (optimal with vision detection) |
| Control Accuracy | 0.025mm |
| Component Type | 0402/0603～5050/SOT/SOP/QFP/QFN/BGA, etc. (resistor/capacitor/diode/triode/LED/IC, etc.) |
| PCB Thickness | 0.6mm~3.5mm |
| PCB Size | 10mm(L)×10mm(W)～345mm(L)×360mm(W) |
| PCB Conveying | Manual operation |
| Nozzle Change | Manual operation |
| Control System | Built-in computer(embedded Linux operating system), 7-inch touch screen |
| Drive System | X&Y-axisdriven by stepping motors in the way of closed-loop control realized by encoder; Z-axis capable of reset detection;all motors adopting flexible S-curve acceleration and deceleration; tape puller automatic reset supported |
| Transmission System | Synchronous belt + polished rod +linear guide |
| Feeding System | 58 tape feeding stacks(8mm:44,12mm:8；16mm:4,24mm:2；customization supported), 14 preset general IC stacks, worksurface custom IC trays and stick feeder supported |
| Vision System | Up-looking camara for component automatic calibration (component size applicable: 22mm×22mm); down-looking camera for PCB calibration via Mark Point and component positioning |
Machine features and advantages:
With Vision system , and embedded computer with Linux system.
With closed loop control. can move more faster and smoothly
with 58pcs feeders, more effective. can work with more kinds of
components.
with 9 kinds of different nozzles, can place with 0201, 0402, 0603,
0805-505 etc, and QFN, SOP, LQFP. all kinds of IC. and diode,
triode.
with Z axis detection can self-checking the height and angle during
placement. can make sure this machine work well with various kinds
of components.
We can supply English machine operation manual and technical
support. Please be confident to make the purchase.
Up & Down Double Vision Camera
Auto Correction
CHM-T36VA has double CCD vision cameras, which can auto calibrate the offset for all different kinds of component and ICs, auto correction of pick position and angle ,it is industry camera with high accuracy taking image of IC, to make sure the accuracy, calibrate two component of offset and rotation for PCB.
Closed-loop Motion Control System
it can be four-axis linkage, move faster and smoothly. both nozzle can working together, not single nozzle working any more, support single step. X,Y axis encoder installed, never lose step. Flexible S accelerate and decelerate, make sure high speed placement working perfect.
58pcs Feeders Supported
44pcs 8mm, 8pcs 12mm, 4pcs 16mm, 2pcs 24mm.
Z axis Detection
Z axis detection can self-checking the height and angle during placement. make sure machine work perfectly with different kinds of components. nozzles are Juki, magnet inside, use your finger can remove it down, no need wrench , very convenient.
Visual industrial control- easy operation
Embedded good quality industrial PC with Linux system. Powerful function, run smoothly. 7 inch LCD touch screen has a wide vision easy learning and operation.
9 kinds of different Juki nozzle supported
High precision placement
Machine can install 501-508 kinds of Juki nozzles
Able to mount 0201,0402,0603,0805-5050,SOP,QFN,LQFP144,all kinds of IC, and diode, triode…
| Dimensions | 420mm×405mm×265mm |
| Net Weight | 20kg |
| Rated Power | 2500W (peak power) |
| Rated Voltage | AC220V 50Hz/60Hz |
| Drawer Size | 300mm×300mm |
| Soldering Type | Lead Soldering / Lead-free Soldering |
| Maximum Soldering Temperature | 300°C |
| Heating Mode | Infrared ray & hot air |
| Temperature Control Accuracy | ±1°C (at constant temperature) |
| Soldering Cycle | 5 ~ 10 minutes |
| Saved Reflow Curve Quantity | 8 |
| Dimensions | 540mm×380mm×390mm |
| Net Weight | 20kg |
| Work Table Size | 300mm×400mm |
| Maximum Printable Size | 300mm×400mm |
| Maximum Net Frame Size | 370mm×470mm |
| Printing Speed | Manual Control |
| Thickness of Printable Substrate | 0mm ~ 80mm |
| Work Table Horizontal Adjustable Volume | 10mm |
| Printing Platform Height | 190mm |
| Repeated Printing Accuracy | ±0.01mm |
| Positioning Mode | Border positioning or benchmark hole positioning |
