HUNAN CHARMHIGH ELECTROMECHANICAL EQUIPMENT CO., LTD. |
Verified Suppliers
|
|
LED Display 60W SMT Solder Paste Mixer Machine For PCB Assembly Line
About Us
Hunan Charmhigh Electromechanical Equipment Co., Ltd is the
well-known manufacturer of high-end
SMT equipment in China.
The company is located in the Changsha High-tech Development Zone,
covering a total area of 3600 square meters.
As a professional modern science and technology enterprise capable
of both R&D,
production and marketing, Charmhigh has been leading the way in SMT
technology
for more than ten years.
Different series of multi-head full-automatic SMT machines have
been developed and
manufactured by Charmhigh to meet various practical production
needs.
In accordance with the business philosophy of "Customer First,
Innovation Paramount",
Charmhigh has won the hearts of thousands of customers all over the
world.
The mixer 5500D uses the principle of imitating planetary operation to fully stir the solid and liquid components in the solder paste to achieve a completely consistent density.
It can exhibit better thixotropy in subsequent screen printing and reflow soldering. And welding ability. It can also standardize operations and reduce the chance of solder paste absorbing moisture.
Features
Model | MIX5500D |
Power supply | AC 220V 50Hz 60W |
Running speed | First turn:1380RPM; |
Ability | 500g*2 cans(Can accept solder paste tank M tank diameter φ60-φ67 standard equipment) |
Display | LED digital display |
Machine size | W400*D400*H500mm |
Net weight | 35KG |
1. Please place the machine close to the place that meets the power
supply of this equipment, and the ground should be stable.
2. Make sure that the power switch is off, and then plug in the
power cable.
3. Open the door lock and lift the top cover of the machine.
4. Place the solder paste can
4.1 Please take out the solder paste that needs to be stirred,
remove the inner cover of the solder paste, and tighten the cover
again.
4.2 If it is necessary to stir two tins of solder paste at the same
time each time, the masses should be equal, and the difference
should be within 50 grams.
4.3 If only one tin of solder paste is stirred at a time, please
load the waste solder paste of the same specification and quality
into another fixture to keep it in balance. (Note that the old cans
are marked to avoid mixing).
4.4 Open the solder paste jig, put the solder paste can into it,
then close the lid, and lock the lid buckle.
If the solder paste tank is not standard equipment, too large or
too small, please contact our company.
4.5 After loading the solder paste, make sure that nothing is left
in the machine.
5. Close the cover and lock the door lock.
6 Turn on the power switch, if you need to adjust the time, please
set the time relay.
7 According to the bright switch, the lighting lights are turned
on. If you want to start the machine, you must reset the lighting
switch; press the start switch, the machine starts to run, and the
lights are also on. When the set time is reached, the motor stops
running, and the colored lights are also extinguished at the same
time. When the motor is running, press the stop switch, the motor
will stop running, and the colored lights will go out at the same
time.
8 When the machine is running, if you want to forcibly turn off the
power and open the upper cover, be careful not to touch the
rotating parts.
Packing List:
1.User manual 1 pcs
2.Machine body 1 set
3.2 rubber pads (used to keep the locking screw of the solder paste
fixture clean)
4.Power cord 1 pcs