HUNAN CHARMHIGH ELECTROMECHANICAL EQUIPMENT CO., LTD. |
Verified Suppliers
|
|
0.015mm 11000cph High Speed Pick And Place Machine With Vision System
ABOUT US
Hunan Charmhigh Electromechanical Equipment Co., Ltd is the
well-known manufacturer of high-end SMT equipment in China.
The company is located in the Changsha High-tech Development
Zone,covering a total area of 3600 square meters.
As a professional modern science and technology enterprise capable of both R&D,production and marketing, Charmhigh has been leading the way in SMT technology for more than ten years.
Different series of multi-head full-automatic SMT machines have been developed and manufactured by Charmhigh to meet various practical production needs.
In accordance with the business philosophy of "Customer First, Innovation Paramount", Charmhigh has won the hearts of thousands of customers all over the world.
CHM-T510LP4Specifications | |
Dimensions | 2060mm(L)×605mm(W)×700mm(H) |
Weight | 145kg |
Power Supply | AC220V (50Hz, single phase)/AC110V (60Hz, single phase);400W |
Air Supply | 0.5MPa ~0.7MPa |
Vacuum Generation | Built-in vacuum pump |
Mounting Head Quantity | 4 |
Mounting Speed | 11000cph(optimalwithout vision detection); 5500cph (optimal with vision detection) |
Control Accuracy | 0.015mm |
Component Type | 0402/0603~5050/SOT/SOP/QFP/QFN/BGA, etc. (resistor/capacitor/diode/triode/LED/IC, etc.) |
PCB Thickness | 0.6mm~3.5mm |
PCB Size | 10mm(L)×10mm(W)~1200mm(L)×240mm(W) |
PCB Conveying | Manual operation |
Nozzle Change | Manual operation |
Control System | Built-in computer (embedded Linux operating system), 7-inch touch screen |
Drive System | X&Y-axisdriven by stepping motors in the way of closed-loop control; Z-axis capable of reset detection;all motors adopting flexible S-curve acceleration and deceleration |
Transmission System | Synchronous belt+linear guide |
Feeding System | 8 Yamaha standard pneumatic feeder stacks, Yamaha electric feeder supported |
Vision System | Up-looking camara for component automatic calibration (component size applicable: 22mm×22mm); down-looking camera for PCB calibration via Mark Point and component positioning |
Machine description:
CHM-T510LP4 is an professional LED design pick and place machine. with 1.2M moving table, it has 4heads and 8pcs Yamaha feeders.
This machine is not only for LED patching work, also can work with 0402. 0603, 0805-5050, SOP, QFN, LQFP, Diode, Transistor.
within embedded industry PC and Linux system. the main board of the machine was developed by ourselves, with good quality and long lifetime. Please buy with confidence.
Automatic of EX axis
High speed movement can assemble a PCB of 1200mm length
High speed movement, highly accurate
Magnetic plate positioning
Check make point visually and automatically, effective and accurate
EX axis covered by magnetic plate, can suitable for various PCB of different size and shape, precise positioning, good performance, easy operation
8pcs Yamaha pneumatic feeder supported
simple & convenient operation
CHM-T510LP4 work with standard Yamaha pneumatic feeder ,it is more stable and longer lifetime. pneumatic feeders can improve the working efficient a lot.
Closed-loop Motion Control System
it can be four-axis linkage, move faster and smoothly. both nozzle can working together, not single nozzle working any more, support single step. X,Y axis encoder installed, never lose step. Flexible S accelerate and decelerate, make sure high speed placement working perfectly.
Z Axis Detection
Z axis detection function can self-checking the height and angle
during placement.
Make sure machine work perfectly with different kinds of
components.
9 kinds of Juki nozzles supported, magnet inside, you can change the nozzle by hand, no need wrench, very convenient.
Industry Touch Screen
Machine uses embedded Linux operation system, This system runs stable with strong compatibility and powerful function. Machine has a in-build 7 inch full touch screen, external USB mouse also accepted. Very easy and convenient operation. You can get a quick start within half an hour.
Notes
1.Machines need keeping away from the humid environment and dust,
or which will get on electrical shock and fire.
2.Machines need lying stable platform, or which the shake may lead
to reduce the precision and even turn over and personal injury.
3.Don’t dismounting the machines casually, or the machine may be
broken.
4.Don’t touch the optical axis and the mounting head, or which may
damage the machine and hurt yourselves.
5.Make sure the machine engine accordance with the requirements of
the standard machine and make sure lie on the ground very well.
6.Make sure the machine away from the inflammables and explosives
to avoid the fire and getting the electric shock.
7.Take the small machine parts like suction nozzle at the place
where the babies can’t touch.
8.Don’t take the pulling needle stretch out for too long time, or
the pulling needle will be broken.
9.Don’t take the machine in the Sun or the highlight directly, or
which will reduce the machine precision and even broke the machine.
10.Please kindly contact us if any other questions.
FAQ
1. Whether the linear guide rail and round rod have an impact on
the accuracy of the SMT pick and place machine ?
No impact at all .Using linear guide rail or round rod has no
effect on the accuracy of the mounting machine, the precision of
the mounting machine depends on the motor and software control
system used by the mounting machine only.
2. Is the software control system of your desktop SMT independently
developed by your company?
Yes, our desktop SMT uses Linux system. Linux system supports
cross-platform hardware support, rich software support, reliable
security and stability.
3. Do you use electromagnetic coil to control the pulling needles?
What are the advantages if comparing to cylinder control?
Yes, the drawing needle we use is controlled by the electromagnetic
coil. Comparing with the cylinder control, the electromagnetic coil
control has the characteristics of faster response, softer force
and less noise. The quick reaction can speed up the mounting speed;
Soft strength refers to the strength of the pull needle is soft
when pressing down, and the pull needle is not easy to break.