|
[China]
Trade Verify
Address: 104-604, Building D, Jindao Industrial Park, No. 179 Huizhi Middle Road, Hi-tech Development District, Changsha, Hunan, China.
Contact name:Karl Liang
HUNAN CHARMHIGH ELECTROMECHANICAL EQUIPMENT CO., LTD. |
|
Verified Suppliers
|
|
|
New Charmhigh CHM-550 Automatic Nozzle Change SMT PCB Pick And Place Machine
Accuracy test (everything speaks with data, reject false advertising!)
CHM-550 equipped with CPK test function can truly reflect the accuracy and stability of the pick and place machine
Speed test; (Everything speaks with data, reject false advertising!)
According to the industry standard IPC9850 of the pick and place machine, the actual placement speed is a true test of the speed
Hunan Charmhigh Electromechanical Equipment Co., LTD. was founded in 2009. Charmhigh is a national high-tech company in China, the existing site is 3600 square meters and an industrial park of 40,000 square meters under construction, which will be put into use in 2023
| CHM-550 Specifications | |
| Dimensions | 980mm(L)X 1050mm(W) X 880mm(HD) |
| Weight | 190kg |
| Power Supply | AC220V (50Hz,single phase) 600W |
| Air Supply | 0.5MPa ~0.7MPa |
| Vacuum Generation | Vacuum generator (Japan PISCO) |
| Mounting Head Quantity | 4 |
| Mounting Speed | 6500cph ( Visual inspection) IPC9850: 5000CPH |
| Mounting Accuracy | ±60μm@μ±3σ/chip CPK≥1.0(XY) |
| Control Accuracy | 5μm |
| Component Height | 12mm |
| Component Type | 0201/0402/0603～5050/SOT/SOP/QFP/QFN/BGA, etc. (resistor/capacitor/diode/triode/LED/IC, etc.) |
| PCB Thickness | 0.6mm~3.5mm |
| PCB Size | 400mm(L)×350mm(W) |
| Nozzle Change | Automatic nozzle change (13 hole nozzle library) |
| Control System | Built-in industrial computer (Windows 7) equipped with monitor, keyboard, and mouse |
| Drive System | X&Y axis driven by servo motors;adopting flexible S-curve acceleration and deceleration |
| Transmission System | Ball screw + linear guide |
| Feeding System | 50 Yamaha 8mm standard pneumatic/electric feeder stacks (also suitable for IC tray and stick feeder) |
| Vision System | Snapshot camera×4 (component size applicable: 14mm×14mm); IC camera×1 (component size applicable: 25mm×25mm); Mark camera×2 |
Notes
1.Machines need keeping away from the humid environment and dust,
or which will get on electrical shock and fire.
2.Machines need lying stable platform, or which the shake may lead
to reduce the precision and even turn over and personal injury.
3.Don’t dismounting the machines casually, or the machine may be
broken.
4.Don’t touch the optical axis and the mounting head, or which may
damage the machine and hurt yourselves.
5.Make sure the machine engine accordance with the requirements of
the standard machine and make sure lie on the ground very well.
6.Make sure the machine away from the inflammables and explosives
to avoid the fire and getting the electric shock.
7.Take the small machine parts like suction nozzle at the place
where the babies can’t touch.
8.Don’t take the pulling needle stretch out for too long time, or
the pulling needle will be broken.
9.Don’t take the machine in the Sun or the highlight directly, or
which will reduce the machine precision and even broke the machine.
10.Please kindly contact us if any other questions.
