Gongyi Sanjin Charcoal Machinery Factory |
|
Introduction:
It adopts the advanced carbonized technology heat flow, carbonized
rate increased significantly, The carbonized rate is 99%.And the
operation is very convenient, good safety, high production
efficiency, can save a lot of energy, good environmental protection
performance. Shunt can also dry burning boiler flue gas and so on.
Truly the charcoal, gas and oil range of equipment is currently the
world's most advanced carbonization furnace.
Model | 120 | 170a | 170b | 190 |
Output | 2t/24h | 4t/24h | 7t/24h | 10t/24h |
Weight | 1.68t | 3t | 3.5t | 6.8t |
Volume | 3m3 | 5m3 | 10m3 | 15m3 |
Inner pot diameter | 1.2m | 1.7m | 1.7m | 1.9m |
Inner pot length | 2.6m | 2.2m | 4.6m | 5.3m |
Carbonization | 6-8h |
The feature:
1. Carbonization furnace is the use of horizontal manufacturing
process, carbonization furnace has a three-layer structure, and the
middle of light insulation materials,It is possible to keep the
temperature in the furnace at all times.
2. The door use packing seal, not into the air, Out of carbon than
the conventional carbonization furnace is much higher.
3. The reason is called green carbonization furnace because the
stick in the carbonization process will produce a lot of light
yellow combustible gas. These gases through the carbonization
furnace with there own pipes can make combustible gas diversion to
the charring furnace combustion zone to the second fire heating.
More environmentally friendly and saving fuel.
4. Carbonization furnace excess gas can be used to dry the sawdust
or to burn the boiler.
5. Carbonization furnace to end charcoal cooling time is shorter,
we use the inter layer of the gap between the unit water cooling
carbonization furnace natural cooling, more efficient and
convenient.
6. Environmental air carbonization furnace Supporting a track and
kiln car, use more convenient,reduce worker labor intensity.
Customers to buy this carbonization furnace really reached a
simple, labor-intensive, easy to install charcoal out of carbon,
cooling time greatly reduced, carbonization furnace production can
be greatly improved.
Carbonization furnace can be customized according to customer
requirements.(Materials and working process).
Advantage:
1. Due to its design principle with two layers,one is the cooling
layer, another is the heat preservation layer, so can reduce its
carbonization time.
2. It can use different material as heating source.Such as the
Firewood/coal gas/ natural gas/liquefied gas/Combustible
gas(produced during the carbonized process).
3. Using anaerobic coking and combustible gas recycling technology.
4. Every step from raw materials to production process will be
monitored by the engineer, equipment debugging the final before
delivery.With engineer and boss signature before shipment ensure
the reliability of the technology, has the practicability of
products.
5. Smoke purification treatment :Water and activated carbon
filtration purification gas.
1. Supply to USA, Europe, and Australia
2. Material: bamboo, wood, wood log, branches, coconut shell, wood
briquette, biomass briquette etc.
3. Professional charcoal machine supplier
4. Energy saving, it can reuse the smoke produced during the
process of carbonization.
In the carbonization process ,can produce combustible gas,can
recycle these gas.These gas delivery to the white tank through No.1
pipeline,then open the valve of the No.2 pipeline, these gas can
reach to the bottom of the furnace through the No.2 pipeline.At the
No.4 valve, you can be connected to a pipeline at the No.4 valve,
so that can use the extra gas,these gas can cooking, burnning
boiler etc.So can save some cost, it is energy saving.
This is shunt tank, at the Nbottom(NO.5) can collect the wood tar.
To improve the design of the charcoal carbonization furnace, in order to prevent gas leakage, the oven door with graphite packing seal, greatly enhancing the effect of carbonization
1. OEM Manufacturing welcome: Product, Package...
2. Sample order
3. We will reply you for your inquiry in 24 hours.
4. after sending, we will track the products for you once every two
days, until you get the products. When you got the
goods, test them, and give me a feedback.If you have any questions
about the problem, contact with us, we will offer
the solve way for you.
Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown
cartons. If you have legally registered patent, we can pack the
goods in your branded boxes after getting your authorization
letters.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the
photos of the products and packages before you pay the balance.
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF.
Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your
advance payment. The specific delivery time depends on the items
and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We
can build the molds and fixtures.
Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but
the customers have to pay the sample cost and the courier cost.
Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery
Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our
customers benefit ;
2. We respect every customer as our friend and we sincerely do
business and make friends with them, no matter where they come
from.
Q9: How about the quality of your products?
A: Our machine are manufactured strictly according to national and
international standards and we take a test on each equipment before
delivery. You can also use Trade Assurance by Alibaba for product
quality protection, on-time shipment protection and payment
production.
Q10: How about the price?
A: We are factory, and we can give you lower price than those trade
companies. Besides, customs from Alibaba can get a discount.
Q11: Do you provide after-sales services?
A: Yes. The warranty period of our machine is one year, and we have
a professional after-sale services team to promptly and thoroughly
solve your problems.