ASTM A641 Standard Cross Wire Spaced 16" building construction
Ladder Mesh
Ladder Mesh Introduction:
Ladder Mesh is a prefabricated reinforcement for embedment in the
horizontal mortar joints of masonry.
It is manufactured in 10′ 8″ lengths from wire conforming to ASTM A
82 / A82M for cold drawn steel wire.
It consists of two or more parallel and deformed longitudinal wires
welded to a perpendicular cross wire spaced 16″ O.C. Out-to-out
spacing is approximately two inches less than the nominal thickness
of the wall.
MATERIAL : Iron wire & stainless steel wire 304/316
Qijie metal joint reinforcement products conform to:
ASTM A951 (Standard Specification for Steel Wire for Masonry
Joint Reinforcement)
Our products pass the testing of ASTM A951,We tested in USA .
Tensile Strength - 80,000 p.s.i. | Yield Point - 70,000 p.s.i.
minimum
Zinc Coating:
Mill Galvanized coating: (0.1 oz/ft²)
Hot-Dip Galvanized after fabrication: (1.5 oz/ft²)
Wire Diameter:
9 gauge or 3/16ӯ
Side Rods and Cross Rods available in any combination of the above.
Cross Rods welded 16” O.C.
Block Size: Standard Sizes: 4” wall - 16“ wall.
Other widths available on special request.
Ladder Mesh Standard Specification:
ITEMS # | Block width | Mesh width | Weight(KGS) | PACKING |
QJM2 | 4'' | 2'' | 0.57 | 50PCS/BDL,20BDL/PALLET |
QJM4 | 6'' | 4'' | 0.61 | 50PCS/BDL,20BDL/PALLET |
QJM6 | 8'' | 6'' | 0.64 | 50PCS/BDL,20BDL/PALLET |
QJM8 | 10'' | 8'' | 0.68 | 50PCS/BDL,20BDL/PALLET |
QJM10 | 12'' | 10'' | 0.71 | 50PCS/BDL,20BDL/PALLET |
Standard Length | Width | Finishes |
10’(3.05m) | 2”(50mm) | UncoatedElectro GalvanizedHot Dipped Galvanized After FabricationStainless Steel |
| 4”(100mm) | |
| 6”(150mm) | |
| 8”(200mm) | |
| 10”(250mm) | |
All products conform to: ASTM A641 - (Electro galvanized ) ASTM A153 Class B2 - (Hot dipped after fabrication) ASTM A 82 - (Cold drawn steel wire) Tensile Strength:80,000 PSI;Yield Point:70,000 PSI
minimum;Reduction of Area:30 %. ASTM A951-96 - (Masonry wall reinforcing) ASTM 580 Type 304 - (Stainless steel) |
Ladder Mesh Feature :
* Greatly reduces cracking that can arise from thermal stresses.
This enhances resistance to water penetration, as cracks are
controlled.
* Increases lateral flexural strength.
* Bonds exterior and interior masonry wythes together in composite
or cavity walls. Also bonds masonry at intersecting walls and
corners
* Increases elasticity and performance of masonry walls under
various stresses
Ladder Mesh Application:
Concrete slabbing, roads, paving, foundations, marine work, bank
strong rooms, partition slabs, concrete block work, asphalt
guttering and so on
![](http://img.everychina.com/nimg/fe/dc/0da931972cfbe7d167fd511270f1.jpg)
![](http://img.everychina.com/nimg/04/c0/ef01b94244feb98d59f75fc223f7.jpg)
![](http://img.everychina.com/nimg/66/b4/6c9de69dad24c4ffc797091c54b6.jpg)