Active Member
|
[China]
Address: No.68, Hua Qiao Road,Lin'an Cross Board E-commerce Zone,Hangzhou City,Zhejiang,China
Contact name:James Tang
HANGZHOU LECCO ELECTRIC APPLIANCE CO.,LTD |
|
|
Energy Saving Bulbs Half Spiral 11W CFL Compact Fluorescent Lamps SDCM < 5 No EMI
introduction
1 . No mercury vapor , using solid mecury technology , Hg < 3mg .
2 . The key components is the electrolytic capacitor and transister , we are choosing GRP or AISHI for our electrolytic capacitor and choosing HUAJING as our transister .
3 . Easy to apply , can change traditional incandescent bulbs directly , the ballast in integrated in to the lamp .
4 . Using nickleplated aluminum base , very good to avoid getting rusted .
Description
1 . Passing the EMC test .
2 . Saving 80% electricity compared to traditional incandescent bulbs .
3 . Can start under the condition of - 30 ℃ and low voltage .
4 . All products are output strictly under ISO 9001 Quality Management System and CE satisfied .
5 . Voltage : Both 110 - 130V and 220 - 240V available with 50 / 60Hz ; Wide range voltage is possible .
Quick Details
| Model No. : LCF-HS11W-T2 | Certificate : CE RoHS FCC |
| Item Type : Half Spiral | Power : 11W |
| Brand name : LECCO | Color Temp. : 2700K - 6400K |
| Warranty : 1 year | Working Temp. : - 30 - 40℃ |
| Package Detailes : Color Box / Blister in Carton | |
Lamp parameters
| Tube Parameter for CFL | Type | Half Spiral |
| Tube Diameter | Φ 7mm | |
| Wideth | 46mm | |
| Circle | 3T | |
| Color Rendering Index | > 80 Ra | |
| Luminous Efficency | > 55 lm / w | |
| Responsive Time | < 0.5s | |
| Turn on off time | > 10 000 times | |
| Luminous Decay | Less than 15% at 2000hrs | |
| Powder | 100% A - gradeTriphosphor | |
| Electronic Parameter for CFL | Power | 11W |
| Power Factor | > 0.5 | |
| Working Voltage | 110V - 127V / 185 - 265V | |
| Base | Size | E27 |
| Materials | Nickelplated Aluminum | |
| Type | Soldering | |
| Plastic cover | Wideth | 40m |
| Materials | PBT | |
| No middle cover | ||
| Operating Temp. | - 30 ℃ to + 40 ℃ | |
Competitive advantage
1 . Strict raw materials inspection .
2 . Technical parameter adjustment :
1 ) Technicians will tune the technical parameters of each items to make sure the Wattage,P.F living up to the requirement of customer
2 ) Destructive test , light it in the oven to be under the conditions of high temperature and high voltage
3 ) Turn on off test , to make sure the life time of the lamp
4 ) Start test in low temperature and low voltage ( light in the fridge )
3 . In the mass production , our QC will take selective examination on every step , such as Plug-in , Wave soldering , PCB test , Tube glue , Assembly , Print , Ageing , Packing .
4 . we are testing every lamp before packed in the cartons .
5 . In the warehouse,our QCs will take sampling inspection before load the container , if not qualified with the AQL , we will rework .
6 . After laoding the container,we will trace the life time of ech order,we will pick 10 pcs of each item to light in the ageing room till the lamp die , so we can trace down the real life time of each order .
Application
Widely used in home & commercial Lighting , always using together with the downlight fixtures , applying in office , Hallway , Hotel , room , shop , ect .
