Active Member
|
[China]
Address: No.68, Hua Qiao Road,Lin'an Cross Board E-commerce Zone,Hangzhou City,Zhejiang,China
Contact name:James Tang
HANGZHOU LECCO ELECTRIC APPLIANCE CO.,LTD |
|
|
1200 lm Brightness Compact Fluorescent Lamps 3U 20W Tricolor T4
8000h Lifetime
Description
1 . Guarantee is for 2 years .
2 . The average lifetime of our lamp is at least 6000h .
3 . Saving 80% electricity compared to traditional
incandescent bulbs .
4 . The key components is the electrolytic capacitor and
transister , we are choosing GRP or AISHI for our electrolytic
capacitor and choosing HUAJING as our transister .
5 . Easy to apply , can change traditional incandescent bulbs
directly , the ballast in integrated in to the lamp .
Lamp parameters
| Tube Parameter for CFL | Type | 3U |
| Tube Diameter | Φ 12mm | |
| Wideth | / | |
| Length | 105mm | |
| Circle | / | |
| Color Rendering Index | > 80 Ra | |
| SDCM | < 5 | |
| Color Temparature | 2700K - 6400K | |
| Luminous Efficency | > 60lm / w | |
| 2000h Luminous Depreciation | < 15% | |
| Responsive Time | < 0.5s | |
| Turn on off time | > 10 000 times | |
| Luminous Decay | Less than 15% at 2000hrs | |
| Powder | 100% A - gradeTriphosphor | |
| Electronic Parameter for CFL | Power | 20W |
| Power Factor | > 0.5 | |
| Working Voltage | 185 - 265V | |
| Transister / Capacitor | Huajing / Aishi | |
| Base | Size | E27 |
| Materials | Nickelplated Aluminum | |
| Type | Soldering | |
| Plastic cover | Wideth | 52mm |
| Materials | PBT | |
| No middle cover | ||
| Operating Temp. | - 30 ℃ to + 40 ℃ | |
| Life Time | > 8000H | |
| Time need to be stable | 3 Mins | |
| Lumen | > 1200 LM | |
Features
1 . Power : 20W
2 . P.F. : > 0.5
3 . Power consumption: < 10%
4 . Lead free glass tube
5 . Compact type , integrate the ballast in the lamp
6 . 100% triphosphor A - grade powder
1 ) Luminous efficency: > 60
lm / w
2 ) Brightness maintance: >
80% after 2000H
3 ) CRI : > 80 Ra
4 ) SDCM : < 5
Application
Widely used in home & commercial Lighting , always using
together with the downlight fixtures , applying in office , Hallway
, Hotel , room , shop , ect .
Quality Control ( QC )
1 . We have 4 QCs to check the raw Materials , such as tube ,
Transister , Electrolytic . capacitor , inductor , resister , diode
, magnet ring , capacitor , PCB board , plastic cover .
2 . Before the mass production , our Technicians will tune the
technical parameters of each items to make sure the Wattage , P.F.
living up to the requirement of customer,and also will do the High
temperature and high voltage test ( llight it in the oven ) , doing
the destructive test , and also will do the turn on off test , to
make sure the life time of the lamp , also do the start tets in low
temperature and low voltage ( light in the fridge ) .
3 . In the warehouse , our QC will take sampling inspection
before load the container , if not qualified with the AQL , we will
rework .
4 . After laoding the container , we will trace the life time
of ech order , we will pick 10 pcs of each item to light in the
ageing room till the lamp die , so we can trace down the real life
time of each order .
