Hunan Meicheng Ceramic Technology Co., Ltd. |
Verified Suppliers
|
|
Water Valve Plate Ceramic
1.Product Descriptions:
The spool ceramic sheet has the characteristics of strong wear
resistance, good corrosion resistance, good sealing performance,
long service life, high tensile strength, not easy to deform, high
temperature resistance, low temperature resistance, etc., and has
unparalleled advantages in sealing water and service life . The
ceramic piece in the valve core enables the faucet to be used for
500,000 times without dripping, and it also achieves the purpose of
environmental protection and water saving.
Ceramic core faucet is a faucet installed at the end of the fluid
pipe to switch or adjust the flow rate. It is composed of an inlet
connector, an outlet connector, two similarly shaped ceramic
pieces, two similarly shaped washers, two "O" rings, ring washers,
connecting nuts, handwheels and adaptors. When the handwheel is
rotated, the outlet joint rotates to drive the lower ceramic plate
to rotate, and the through holes on the two ceramic plates are
aligned or staggered. Due to different specifications, the switch
or flow rate of the faucet is also different. Ceramic valves are
mainly used in sanitary and sealing industries.
2.Key Words:
sanitary and sealing industries,trong wear resistance, good corrosion resistance, good sealing performance, long service life, high tensile strength, not easy to deform, high temperature resistance, low temperature resistance.
3.Parameters:
Product Parameters | ||
Physical Property | Material | 95% Alumina |
Production Process | Dry Pressing | |
Product Dimension | Per customers' drawing | |
Density (g/cm3) | 3.70-3.75g/cm3 | |
Water Absorption | 0% | |
Mechanical Performance | Flexural Strength (Mpa) | 310Mpa |
Modulus of Elasticity (Gpa) | 310Gpa | |
Hardness (Gpa) | 12.9Gpa | |
Poisson Ratio | 0.23 | |
Thermal Character | Linear Thermal Expansion Coefficient | 7.2 |
Heat Conductivity (W/mk) | 23 | |
Electrical Property | Dielectric Constant | 9.2 |
Dielectric Loss Tangent (x10-4) | 8 | |
Insulation Strength (x106V/M) | 15 |