|
[China]
Trade Verify
Address: 102 Room, No.6 Changxing Road, Chang An Tang, Dongkeng town, Dongguan,Guangdong,China
Contact name:Grace_ Zhong
Dongguan Fuyconn Electronics Co,.LTD |
|
Verified Suppliers
|
|
|
15mm 64 Pin Male Straight PCB 2 rows 2*32pin 64Pin Eurocard Connector w/ 13mm Terminals DIN 41612 Connector
DIN 41612 is a DIN standard for electrical connectors that are
widely used in rack based electrical systems. Standar disation of
the connectors is a pre-requisite for open systems, where users
expect components from different suppliers to operate together. The
most widely known use of DIN 41612 connectors is in the VMEbus
system.
The DIN 41612 has been widely accepted as a standard for a variety of interconnection applications in the telecommunications and data markets worldwide. The most widely known use of DIN 41612 connectors is in the VME bus system.DIN connectors with three rows(a, b, c) of contacts on 0.100"(2.54mm) square grid are available in wire-wrap or solder tail type terminations. 5pin 10pin, 15pin 20pin,30pin, 32pin 48pin 64pin and 96pin are available.
| Product features: | |
| 1. Product Line: | DIN41612 Connector |
| 2. Termial Length: | 4mm/13mm/15mm/17mm/25mm |
| 3. Connector Type | PCB DIN 41612 Connector |
| 4. Connector Gender: | Male |
| 5. Number of Position: | 2*32P 64pin |
| 6.Number of rows: | 2 rows |
| 7. Contact Material: | Brass |
| 8. Contact Plating: | 1U", 3U", 5U", 10U", 15U",30U" |
| 9. Insulation Material: | PBT |
| 10.Color | Gray |
| 11. Terminal Type | PCB Straight |
| 12. Pitch | 2.54mm |
| Electrical Specifications | |
| 1. Current Rating: | 5Amp |
| 2. Voltage rating: | DC 1000v per minute |
| 3. Insulator Resistance: | 1000Mn MIN.(at 500V DC) |
| 4. Operation Temperature: | -55°C to +105°C |
Eurocard line is available in board-to-board, wire-to-board, ribbon cable-to-board, and high-current connectors. Our Eurocard connectors incorporate internationally accepted design advantages of DIN 41612 and IEC 60603-2 two-piece connectors in a quality design that provides high Signal Integrity (SI) and electrical performance. With a broad portfolio, it is easy to find the right connector type and style to fit your application. Common Bus Systems include STE Bus, CIMBUS, FUTUREBUS, VMEBus, MULTIBUS (II), NUBUS, VXi Bus, and VME 64X.
DIN 41612 was a DIN standard for electrical connectors that are widely used in rack based electrical systems. Standardisation of the connectors is a pre-requisite for open systems, where users expect components from different suppliers to operate together. The most widely known use of DIN 41612 connectors is in the VMEbus and NuBus systems. The standard has withdrawn in favor of international standards IEC 60603-2 and EN 60603-2.
