Active Member
|
[China]
Address: 260# West Huaian Road, Shijiazhuang, Hebei, China. 050051
Contact name:
Shijiazhuang Minerals Equipment Co. Ltd |
|
|
1. Introduction:
EF4056QU1 is the froth impeller for froth slurry pumps F series, which is especially designed to handle mineral froth.
Materials are available in A05, A08, A09, A12, A33, A49, A51, A52, A61.
There are three different types of slurry pump impellers. Open, closed and semi -open. Everyone has their own advantages and disadvantages, depending on the application. Some are better applicable to solid treatment, while others better improve high efficiency. You must understand more information about each type of detail.
Any type of Impeller can be used in the application of the slurry, but the closed pulp pump impeller is more common because they have high tolerance and abrasion resistance. Open slurry pump Imeller can be used for high concentrations, because their blockage may be less likely. For example, in high -density paper reserves, small fibers may block Imeller. Poch pulp may be difficult, you want to avoid blocking pumps at all costs.
2. Replacement Slurry Pump Impellers:
| Impeller Code | Slurry Pump | Slurry Pump Materials Code |
| B1127 | 1.5/1B- | A03, A04, A05, A06, A07, A12, A14, A25, A33, A49, A51, A61 |
| B15127 | 2/1.5B- | A03, A04, A05, A06, A07, A12, A14, A25, A33, A49, A51, A61 |
| C2147 | 3/2C- | A03, A04, A05, A06, A07, A12, A14, A25, A33, A49, A51, A61 |
| C2127 | 3/2C- | A03, A04, A05, A06, A07, A12, A14, A25, A33, A49, A51, A61 |
| C2051 | 3/2C- | A03, A04, A05, A06, A07, A12, A14, A25, A33, A49, A51, A61 |
| D3147 | 4/3C-, 4/3D- | A03, A04, A05, A06, A07, A12, A14, A25, A33, A49, A51, A61 |
| D3145HE1 | 4/3C-, 4/3D- | A03, A04, A05, A06, A07, A12, A14, A25, A33, A49, A51, A61 |
| D3021 | 4/3C-, 4/3D- | A03, A04, A05, A06, A07, A12, A14, A25, A33, A49, A51, A61 |
| E4147 | 6/4D-, 6/4E- | A03, A04, A05, A06, A07, A12, A14, A25, A33, A49, A51, A61 |
| E4056 | 6/4D-, 6/4E- | A03, A04, A05, A06, A07, A12, A14, A25, A33, A49, A51, A61 |
| E4058 | 6/4D-, 6/4E- | A03, A04, A05, A06, A07, A12, A14, A25, A33, A49, A51, A61 |
| F6147 | 8/6E-, 8/6F-, 8/6R- | A03, A04, A05, A06, A07, A12, A14, A25, A33, A49, A51, A61 |
| F6056 | 8/6E-, 8/6F-, 8/6R- | A03, A04, A05, A06, A07, A12, A14, A25, A33, A49, A51, A61 |
| F6021 | 8/6E-, 8/6F-, 8/6R- | A03, A04, A05, A06, A07, A12, A14, A25, A33, A49, A51, A61 |
| F6058HE1 | 8/6E-, 8/6F-, 8/6R- | A03, A04, A05, A06, A07, A12, A14, A25, A33, A49, A51, A61 |
| FAM8147 | 10/8F- | A03, A04, A05, A06, A07, A12, A14, A25, A33, A49, A51, A61 |
| G8147 | 10/8ST- | A03, A04, A05, A06, A07, A12, A14, A25, A33, A49, A51, A61 |
| FAM10147 | 12/10F- | A03, A04, A05, A06, A07, A12, A14, A25, A33, A49, A51, A61 |
| G10147 | 12/10ST- | A03, A04, A05, A06, A07, A12, A14, A25, A33, A49, A51, A61 |
| FAM12147 | 14/12F- | A03, A04, A05, A06, A07, A12, A14, A25, A33, A49, A51, A61 |
| G12147 | 14/12ST- | A03, A04, A05, A06, A07, A12, A14, A25, A33, A49, A51, A61 |
| GAM14147 | 16/14TU- | A03, A04, A05, A06, A07, A12, A14, A25, A33, A49, A51, A61 |
3. Components:
Impeller
The impeller, either elastomer, stainless steel or high-chrome
material, is the main rotating component which normally has vanes
to impart the centrifugal force to the liquid.
Casing
Split outer casing halves of cast contain the wear liners and
provide high operation pressure capabilities. The casing shape is
generally of semi-volute or concentric, efficiencies of which are
less than that of the volute type.
Shaft and Bearing Assembly
A large diameter shaft with a short overhang minimizes deflection
and vibration. Heavy-duty roller bearing are housed in a removable
bearing cartridge.
Shaft sleeve
A hardened, heavy-duty corrosion-resistant sleeve with O-ring seals
at both ends protects the shaft. A split fit allows the sleeve
removed or installed quickly.
Shaft Seal
Expeller drive seal, Packing seal, Mechanical seal.
Drive Type
V-belt drive, gear reducer drive, fluid coupling drive, and
frequency conversion drive devices.
4. Pump parts materials show
| No. | ITEM | MATERIAL |
| 1 | Impeller | High-chrome alloy |
| Rubber | ||
| 2 | Volute casing | High-chrome alloy |
| 3 | Front liner plate | High-chrome alloy |
| Rubber | ||
| 4 | Rear liner plate | High-chrome alloy |
| Rubber | ||
| 5 | Liner | High-chrome alloy |
| 6 | Expeller | High-chrome alloy |
| 7 | Shaft sleeve | 3Cr13 |
| 8 | Water-seal ring | High-chrome alloy |
| 9 | Shaft | 45#steel quenching And high temperature tempering |
| 10 | Bearing housing | Gray iron |
| 11 | Expeller ring | High-chrome alloy |
| Rubber | ||
| 12 | Front casing | Gray iron or Nodular cast iron |
| 13 | Rear casing | Gray iron or Nodular cast iron |
| 14 | Base | Gray iron |
| 15 | Support | QT500-7 |
5.Performance Curve of 4F Froth Pump with EF4056QU1 impeller:
6.Typical Applications:
CNSME® Rubber Slurry Pump Parts are widely used for Centrifugal horizontal slurry pumps, Vertical rubber slurry pumps, R rubber slurry pumps, Chemical slurry pumps, Silica sand slurry pumps, Minerals processing slurry pumps, De-Watering Screen Pump, Ore sand pumps, Tailings Pump, Pipe-jacking slurry pumps, Ball mill discharge Pump, Tunnelling slurry pumps, Mixing tank slurry Pump, Wet crushers slurry pumps, SAG mill discharge pumps, Ball mill discharge pumps, Rod mill discharge slurry pumps, Ni acid slurry pumps, Coarse sand pumps, Coarse tailings pumps, Phosphate matrix slurry pumps, Scrubber slurry Pump, Minerals concentrate pumps, Heavy media slurry pumps, Dredging Sand slurry pumps, Bottom ash slurry pumps, Fly s, Lime grinding pumps, Screen feed Pump, Oil sands pumps, Mineral Sands pumps, Fine tailings pumps, Tailings booster Pump, Thickner Tailings Pump, Process recycle Pump, Pipeline transfer pumps, Phosphoric acid slurry pumps, Coal slurry pumps, Flotation pumps.
