Active Member
|
[China]
Address: 260# West Huaian Road, Shijiazhuang, Hebei, China. 050051
Contact name:
Shijiazhuang Minerals Equipment Co. Ltd |
|
|
Black Rubber Impeller D3147 , Closed Impeller of Slurry Pump
Description:
The above shown spare parts are rubber impellers for pump SHR/75C (4/3C-R) and SHR/40B (2/1.5B-R). The smaller impellers are open type, and the bigger one is closed type. The material of these impellers is . is a new type of black natural rubber, of low to medium hardness. is used for impellers and rubber liners where superior erosive resistance is required in fine partical slurries.
Function of Interchangeable slurry pump parts
| 1 | horizontal,end suction, cantilever horizontal mining single stage slurry pump parts. |
| 2 | All spare parts are standard world wide, and completely interchangeable with world famous brand(Australia brand) |
| 3 | Good price but high quality |
| 4 | Wear resistance metal,from High Cr 27 to Cr30 |
| 5 | Metal and rubber liner choice,denpend on your needs |
| 6 | Transmission:V belt drive, gear reducer drive, fluid coupling drive, frequency conversion drive devices. |
Specifications:
| Natural Rubber | Standard |
| Hardness(Shore A) | 52±3 |
| 300% Stretching Strength(MPa) | ≥4 |
| Tensile Strength(MPa) | ≥21 |
| Elongation at Break(%) | ≥500 |
| Tensile Set at Break(%) | ≤25 |
| Rubber to Metal Bonding Pull Strength(MPa) | ≥5 |
| Akron Abrasion cm3/1.61km | ≤0.08 |
| Acid & Alkali Resistant PH Value(Liquid) | 3-12≤65℃ |
Explosive of Rubber Lined Slurry Pump:
SME orders of Rubber Pump Spare Parts:
