Active Member
|
[China]
Contact name:
Shijiazhuang Shiza Pump Industry Co.,Ltd. |
|
|
Centrifugal Light Duty Filter Press Feed Pump , High Efficiency Centrifugal Sludge Pump
Filter press pump normally works at 1480rpm. For low press requirements, we can cut impeller diameter or change pump speed to meet the applications. If belt-pulley coupling type required, installation drawing will be made separately.
Flood suction is suggested for its press suction and low suction head.
The suction/discharge diameter of pipe should be the same or bigger than the pump.
For high density slurries, the inlet pipe should not be very long to avoid effecting suction.
Pump spare parts
| 1. Two-phase volute | 12. Shaft sleeve |
| 2. Two-phase impeller | 13. Cover plate |
| 3. One-phase volute | 14. Disassembly ning |
| 4. Back plate | 15. Water retaining pllate |
| 5. Feeding room | 16. Bearing |
| 6. Locating bush | 17. Shaft |
| 7. Expeller | 18. Bearing spacer sleeve |
| 8. Expeller cover plate | 19. Bearing cover |
| 9. Decompression body | 20. Frame |
| 10. One-phase impeller | 21. Bent pipe |
| 11. Tie-bar |
performance table
| Model | Capacity | Head | Speed | Motor | |
| m3/h | m | r/min | model | power | |
| 65ZJW | 27.5 | 76 | 1480 | Y225S-4 | 30 |
| 41.4 | 72.2 | ||||
| 55.2 | 66.1 | ||||
| 69 | 56 | ||||
| 80 | 43.5 | 37 | |||
| 80ZJW | 40 | 76 | 1480 | Y225S-4 | 37 |
| 60 | 72.2 | ||||
| 80 | 66.1 | ||||
| 100 | 56 | ||||
| 115 | 43.5 | Y225M-4 | 45 | ||
| 100ZJW | 56 | 73.3 | 1480 | Y225M-4 | 45 |
| 85 | 69 | ||||
| 113 | 62.5 | ||||
| 150 | 51.2 | ||||
| 169 | 44 | Y250M-4 | 55 | ||
| 125ZJW | 70 | 73.5 | 1480 | Y250M-4 | 55 |
| 105 | 71.6 | ||||
| 140 | 68.6 | ||||
| 186 | 61.9 | ||||
| 245 | 48.5 | Y280S-4 | 75 | ||
| 125ZJW | 79.7 | 80 | 1480 | Y280S-4 | 75 |
| 119 | 78 | ||||
| 159 | 74.8 | ||||
| 211 | 67.5 | ||||
| 279 | 52.9 | Y280M-4 | 90 | ||
| 125ZJW | 58 | 91.8 | 1480 | Y280S-4 | 75 |
| 87 | 89.1 | ||||
| 116 | 85.7 | ||||
| 154 | 77.3 | ||||
| 203 | 60.6 | Y280M-4 | 90 | ||
Using occassion
Minerals Flotation Processing
Electric Factory Coal Preparation
Coal Washing
Chemical Medium Processing
Effluent Handling
Sand And Gravel Handling
Structural Drawing
