Active Member
|
[China]
Address: No. 13, Qingxing Road, Industrial Concentration District, Guli Street, Jiangning Dist., Nanjing, Jiangsu, China (Mainland)
Contact name:Sunny
Nanjing FiveMen Machine CO., LTD |
|
|
GQ142 Tubular Centrifuge Separator For Food Processing Of Olive Oil
Separation
Introduction:
Tubular centrifuge has high performance of separate factor, high capacity, and account for small area and easy to handle, it has been widely used in pharmaceutical, health food, drinks, chemical industries to separate the liquid-solid or liquid-liquid-solid materials. It is an ideal centrifuge take advantage of centrifugal methods, the minimum granules is 1 um, which is suitable for distill, condense and clarify the material has small gravity difference, small and few solid granules and high erosion products.
Feature:
1, High speed and high separation factor
2, manual operation
3, running balance, simple operation, low oil consumption
4, Speed can be adjustable
5, High separation efficiency
6, Suitable for low capacity and price is lower
Technical Parameters :
| GQ105 | GQ145 | |
| Drum speed | 16300 r/min | 14000 r/min |
| Max centrifugal force | 15750 R.C.F | 16900 |
| Drum inner diameter | φ105 mm | Φ145 mm |
| Drum effective length | 730 mm | 770 mm |
| Solid volume in drum | 6 L | 8-12L |
| Stuff inlet pressure | <0.1Mpa | <0.1Mpa |
| Output (water flux) | 1500 L/H | 2500 L/H |
| Motor power | 2.2 KW | 3 KW |
| Specification | 760×450×1680 mm | 890*580*1670 mm |
| Weight | 395kg | 700kg |
| 1. slide bearings; 2. feeding liquid tray; 3. machine head; 4. press wheel part 5. drive part 6. drum; 7. centrifuge body. |
1. Drum is composed by upper cover, regulate loop, bottom
cover drive the hollow axis and pipe drum. In the drum, there
install 4 wing panels, make the liquid easily reach the speed of
running corner. Discharge the liquid from the two outlets on the
top of the drum, and then the liquid flow into the accumulating
tray and tanks.
2. Drum, main axis and flinch joint hang on the belt wheel, the
wheel combined other parts composed of machine head. The upper end
of the axis support on the buffer and the drum linked by nut. The
hollow axis insert in the slide bears and the bearings locked on
the machine body. The slide bearings has shock absorber, it can
float in the level.
3. Only need loosen the linkage nut between drum and main axis, we
can unload the drum from the centrifuge.
4. The outer cover and doors of centrifuge is the shield of drum,
it has stuff inlet. After the stuff enter the inlet it can be
delivered into drum through gush mouth and hollow axis.
5. The motor install on the top of machine body, drive the belt
wheel to make the drum running. Contact stuff part material of the
centrifuge is stainless steel.
