Home Companies Xinxiang SIMO Blower Co., Ltd.

Flue Gas Denitrification Ventilation Centrifugal Fans Backward Blower

Xinxiang SIMO Blower Co., Ltd.

Contact Us

[China] country

Trade Verify

Address: No.343, SIMO Road, FengQuan District, XinXiang City, HeNan Province, China

Contact name:Kevin Sun

Inquir Now

Xinxiang SIMO Blower Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Flue Gas Denitrification Ventilation Centrifugal Fans Backward Blower

Country/Region china
City & Province xinxiang henan
InquireNow

Product Details

Smelting Furnace Industrial Flue Gas Denitrification Ventilation Centrifugal Fan

 

Introduction

 

The 4-14 series centrifugal ventilation fan is suitable for indoor ventilation in general factories and large buildings.

Smelting Furnace Industrial Flue Gas Denitrification Ventilation Centrifugal Fan can be used to input gas as well as to output gas.

The gas delivered by the 4-14 series fan should be no more than 80 °C air and other gases that are not self-igniting and are not harmful to the human body and are not corrosive to steel materials. No viscous substances are allowed in the gas, and the dust and hard particles contained in the gas are not more than 150 mg/m3.

Smelting Furnace Industrial Flue Gas Denitrification Ventilation Centrifugal Fan has large flow and low noise, more use in building ventilation, ventilation and drying of materials, air purification and industrial waste gas treatment, industrial dust collectors, air purification and discharge in hazardous working environments(Paper production line, electrolytic aluminum production line, textile factory...). Blasting of boilers and brick kilns, transport of various gases, transport of granules/powders/debris/fiber materials, etc.

 

Technical data

 

PRODUCT PARAMETERS
Centrifugal Ventilation Fan Application
TemperatureNormal temperature air, Hot air
Air compositionClean air, Dusty air, Corrosive gas, Combustible gas,Powder materials, Light particle materials
Centrifugal Ventilation Fan Performance
Impeller diameter

800-1600

mm
Speed of mainshaft

580~1450

rpm
Pressure range

588~6678

Pa
Flow range

16011~161499

m3/h
Centrifugal Ventilation Fan Structure
BladeBackward
Impeller supportSWSI (Single Width, Single Inlet), Impeller overhung.
DrivetrainV-BeltCan assign
LubricationOil bath lubrication
Bearing coolingAir cooling, Water cooling, Oil cooling
Centrifugal Ventilation Fan System
configuration
MotorABB, SIEMENS, WEG, TECO, SIMO, Chinese brand…

 

Can assign

ImpellerQ235, Q345, SS304, SS316, HG785, DB685...

Casing, Air inlet cone,

Air inlet damper

Q235, Q345, SS304, SS316, HG785, DB685...
Main shaft45# steel(High-strength carbon structural steel), 42CrMo, Stainless steel...
BearingFAG, SKF, NSK, ZWZ…
Centrifugal Ventilation Fan Optional
components
System base frame, Protective screening,Silencer, Inlet & Outlet pipeline compensator,
Inlet & Outlet flange, Damper, Electric actuator, Shock isolator, Diaphragm coupling, Fluid coupling, Motor rain cover, Temperature sensor, Vibrating sensor, Soft starter, Inverter, Special Electrical Motor,System monitoring Instrument, Lube system, Overhead lube tank etc


Advantages and Features

 

1. When the pressure requirement is met, a large gas flow can be output, and the noise is very low.

2. The motor selects the high-efficiency energy-saving motor of China's leading motor manufacturing enterprise (can also install the brand motor required by users), the quality is reliable, and the energy consumption is lower.

3. The V-belt drive makes your fan to operate at the optimum speed. Installation is simple and does not require the support of professional technicians.

4. The airflow channel and the impeller are optimized several times, which is more efficient and energy-saving than ordinary large-flow fans.

5. Made of high quality carbon steel, Stainless steel or other metal materials can also be used according to user requirements.

6. The centrifugal ventilation fan's impeller is annealed to completely eliminate structural stresses generated during welding, ensuring that the impeller does not undergo creep and cracking.

7. After the production is completed, all products are tested for running and vibration values for reliable operation.

8. Installation is simple and does not require the support of professional technicians.

 

Hot Products

Industrial Dust Collector High Pressure Blower Centrifugal Fan Introduction The 9-11 series ...
High Temperature Explosion Protection High Pressure Centrifugal Fan Introduction The 8-17 series ...
Heavy Duty High Volume Air Purification High Pressure Centrifugal Fan Introduction Customized design ...
V-Belt Driven Explosion Proofing Forced Ventilating High Pressure Centrifugal Fan Introduction 9-03 ...
Carbon Steel Anti Abrasive Coupling Driven High Pressure Centrifugal Fan Introduction The series ...
Alternating Current High Air Flow Drying High Pressure Centrifugal Fan Introduction 1. Customized ...