Home Companies ZHUZHOU JINTAI CEMENTED CARBIDE CO., LTD.

Round Carbide Milling Inserts , Tungsten Carbide Tool Inserts With Sharp Edge

Active Member

Contact Us

[China]

Address: No.508 Jinshan Road, Jinshan Industrial Park, Hetang District,Zhuzhou City, China

Contact name:Bonnie

ZHUZHOU JINTAI CEMENTED CARBIDE CO., LTD.

Round Carbide Milling Inserts , Tungsten Carbide Tool Inserts With Sharp Edge

Country/Region	china
City & Province	zhuzhou hunan

Product Details

Cemented carbide is a hard material used extensively as cutting tool material, as well as other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal.

1. The edge is sharp.

2. Good wear resistance and long service life.

3. Special cutting blades for PCB board, circuit board, plastic, PVC board, etc.

4. Mainly used for knitting machine needle groove processing knife, printed circuit board V-groove cutting knife, special parts for glasses parts.

Features:
1. Stable mechanical properties
2. High weldability
3. Excellent Abrasion and corrosion resistance
4. High Impact resistance
5. Sand blasted surface, no peeling, no stratifying (delaminating), no cracking.

Grade information of tungsten carbide blank strip

Not all listed , OEM/ODM is welcome!
Any customized shape and dimension is acceptable!

ISO Code	Grade	Physical and mechanical properties			Applications recommended
ISO Code	Grade	Density g/cm3	Hardness No Less Than HRA(HV)	TRS No Less Than (Mpa)	Applications recommended
K05	YG3	15	90.5	1300	Suitable for finishing of cast iron and nonferrous metal.
K10	YG6X	14.8	91	1700	The finishing& semi-finishing of cast iron and nonferrous metals and also for the machining of manganese stell and hardening steel.
K15	YG6	14.9	89.5	1670	Suitable for the roughing of cast iron and light alloys and also for the milling of cast iron and low-alloy steel.
K20	K30	14.6	89	1840	Suitable for the roughing of cast iron and light alloys and also for the milling of cast iron and low-alloy steel.
M10	YW1	13	91	1290	Suitable for finishing and semi-finishing of stainless steel and conventional alloy steel
	YW3	12.9	92	1390
	YW4	12.3	92	1390
M20	YW2	13	90.5	1460	The grade can be used for the semi-finishing of stainless steel and low-alloy steel and it is mainly used for the maching of railway wheel hubs.
	YL10.2	14.5	91	2800	It has a high flexural strength, and good wear resistance, the use of low-speed rough turning, milling and wear-resistant alloy titanium alloy.