Active Member
|
[China]
Address: Tianyuan District, Zhuzhou City, Hunan Province, China
Contact name:Da WY
Zhuzhou Wei Ye Cemented Carbide Co., Ltd. |
|
|
Good Impact Toughness Cemented Carbide Rods / Durable Tungsten
Round Bar
Tungsten carbide rods are mostly applied for drill bits, end mills,
and reamers with sub-micron grain grade YG10X, for non-ferrous
precision cutting and wood cutting with grade YG6X, and for
fiberglass reinforced plastics, titanium alloys, hardened steel
with ultra-fine grain grade YG8X, etc.
Property and Feature:
1. High-quality ultra-fine tungsten carbide and imported cobalt
powder are used as raw materials.
2, using the world's advanced low-pressure sintering preparation
technology for standardized production.
3. It has high strength and high hardness.
4, has excellent red hardness, good wear resistance, high elastic
modulus, high bending strength, good chemical stability (acid,
alkali, high temperature oxidation), good impact toughness, low
expansion coefficient, thermal conductivity, electrical
conductivity and Similar characteristics of iron and its alloys.
5, high-tech precision advanced equipment: low-pressure sintering
furnace sintering.
6, a unique new process: vacuum high temperature and high pressure
sintering. The product is pressure sintered in the final stage,
which greatly reduces the porosity, improves the compactness, and
greatly improves the mechanical properties of the product.
Diameter:
type | dimension(mm) | |||
diameter(mm) | diameter tolerance(mm) | length(mm) | length tolerance(mm) | |
| Ф4*L | 4 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф4.5*L | 4.5 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф5*L | 5 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф5.5*L | 5.5 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф6*L | 6 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф6.5*L | 6.5 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф7*L | 7 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф7.5*L | 7.5 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф8*L | 8 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф8.5L | 8.5 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф9*L | 9 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф9.5*L | 9.5 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф10*L | 10 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф10.5*L | 10.5 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф11*L | 11 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф11.5*L | 11.5 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф12*L | 12 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф12.5*L | 12.5 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф13*L | 13 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф13.5*L | 13.5 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф14*L | 14 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф14.5*L | 14.5 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф15*L | 15 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф15.5*L | 15.5 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф16*L | 16 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф16.5*L | 16.5 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф17*L | 17 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф17.5*L | 17.5 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф18*L | 18 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф18.5*L | 18.5 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф20*L | 20 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф22*L | 22 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф25*L | 25 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф30*L | 30 | +0.4~0.6 | 10~300 | 0~+3 |
