Active Member
|
[China]
Address: Tianyuan District, Zhuzhou City, Hunan Province, China
Contact name:Da WY
Zhuzhou Wei Ye Cemented Carbide Co., Ltd. |
|
|
K15 K20 Tungsten Carbide Insert For Grooving On Stainless Steel And Cast Iron
Tungsten carbide insert has been widely used worldwide because of its high accuracy and high wear resistance. According to different product uses, carbide inserts can be divided into wood cutters, clamping blades, milling and turning blades.
Grade and Recommended Application:
| ISO Code | Grade | Density g/cm3 | Hardness HRA | TRS Mpa | Application recommend |
| K05 | YG3 | 15.0 | 90.5 | 1300 | suitable for finishing of cast iron and nonferrous metal |
| K10 | YG6X YG6A | 14.8 14.7 | 91 91.5 | 1560 1510 | the finishing & semi-finishing of cast iron and nonferrous metal and also for the machining of manganese steel and hardening steel |
| K15 | YG6 | 14.9 | 89.5 | 1670 | suitable for the roughing of cast iron and light alloy and also for the milling of cast iron & low-alloy steel |
| K20 | YG8 | 14.6 | 89.0 | 1840 | |
| M10 | YW1 YW3 YW4 | 13.0 12.9 12.3 | 91 92 92 | 1290 1390 1390 | suitable for finishing and semi-finishing of stainless steel and conventional alloy steel |
| M20 | YW2 | 12.9 | 90.5 | 1460 | the grade can be use to semi-finishing of stainless steel and low-alloy steel. it is mainly use for the machining of railway hubs |
| P10 | YT05 YT15 | 12.6 11.3 | 92.5 91.0 | 1260 1300 | suitable to the finishing and semi-finishing steel and cast steel with a moderate feed rate and a rather high cutting speed. |
| P20 | YS14 YT14 YS25 | 11.4 11.4 13.0 | 91.5 90.5 90.5 | 1550 1400 1780 | suitable for the finishing and semi-finishing of steel and cast steel YS25 is specially use for the milling of steel and cast steel |
| P30 | YT5 | 12.8 | 89.5 | 1560 | suitable for the heavy duty rough tuming of steel& cast steel with a big feed rate at a medium and low speed under unfavorable working condition |
| K05-K10/M20 | YT26 | 14.0 | 92.5 | 1600 | suitable for the fine and semi-finishing machining of chilled cast iron and nonferrous metal with good performance of the mosetting and wear resistance,also suitable for turning and milling of manganese steel and hardened steel |
| K20 | YD201 | 14.9 | 91.0 | 1800 | suitable for semi-finishing and the roughing of cast of iron and list alloy and also for the milling of cast iron and low alloy steel |
| M05-M10 | YS8 | 13.9 | 92.5 | 1720 | it can be use for the finishing of iron based and nickel based high-temperature alloy and high strength steel.it can also be use for the finishing of chilled cast iron,heat resistant stainless steel,high manganese steel and bardened steel |
| M10 | ｂ60 | 12.8 | 92.5 | 1500 | mainly use for threading of petroleum opipe,also use for fine machining of hardened steel |
| M20 | YM20 | 13.0 | 91.0 | 1750 | Steel, cast steel, manganese steel, gray cast steel, semi-finished and semi-finished milling at medium cutting speed and feed rate |
| P30 | YC30S | 12.9 | 90.0 | 1600 | use for the milling of steel,cast steel and alloy steel |
| P35-P40 | YC40 | 12.9 | 91.0 | 2200 | suitable for the heavy duty turning of steel and cast steel with a big feel rate under unfavorable working condition |
| P40 | YM40 YC45 | 12.75 12.75 | 90.0 90.0 | 2100 2300 | suitable for the heavy duty turning of steel and caststeel with a big rate and also for face milling |
