|
[China]
Trade Verify
Address: Fuli Commercial Center room 301#, Xingang West Rd.11#, Haizhu area, Guangzhou, Guangdong province, China.
Contact name:melody wong
Shijiazhuang Zhengzhong Technology Co., Ltd |
|
Verified Suppliers
|
|
|
Glass Fused to Steel Fire Protection Water Tanks For municipal water industry.
Glass Fused to Steel Fire Protection Water Tanks, can be custom design for any fire protection system. Center Enamel's Glass Fused to Steel Fire Protection Water Tanks engineering design meet or exceed AWWA D103-09 and EN/ISO28765:2011, and our Glass Fused to Steel Fire Protection Water Tanks engineers make tank engineering calculation on each specific tank structure according to project local environmental conditions, such as snow load, wind speed, seismic zone etc., to make sure the tank structure's adequate security in long-term service life.
The concrete tank, steel welded tank, steel bolted tank are the most common tank used in the fire water storage, while the steel bolted tank has the best performance. There are many factors will affect the performance of the concrete tank and steel welded tank. For concrete tank, what is the compound of the cement, are there any contaminants in the cement ect. will lead to different effect on concrete tank, while for steel welded tank, the workmanship of painting and sand blaster, weather humility ect. factors will affect the performance directly, in the meanwhile, it will cause the volatile pollution at the project site as well. Glass fused to steel tank is the factory manufactured tank, the enamel frits and steel sheet will be fused in the high temperature oven, the result is to make these two materials into one compound material. As the enamel frit and steel sheet are burned in the high temperature oven, there is no need to paint at the project site so no volatile pollution caused.
Glass Fused to Steel Fire Protection Water Tanks Specifications
| Coating color | dark blue, dark green, white, and customized |
| A standard steel plate size | effective size 2400mm x 1200 m |
| Steel plates thickness | 3mm - 12mm, depends on the diameter & height |
| Coating thickness | 0.25mm - 0.4mm, two coatings internal and external |
| Acid and alkalinity proof | standard coating suits for PH3 - PH11, special coating suits for PH1 - PH14 |
| Adhesion | 3,450N/cm |
| Elastic | same as steel sheet, around 500KN/mm |
| Hardness | 6.0 Mohs |
| Service life | >30 years |
| Spark test | >1500 V |
| Permeability | gas and liquid impermeable |
| Easy yo clean | smooth, glossy, inert, anti-adhesion |
| Corrosion resistance | excellent! Suitable for wastewater salt water, seawater, high
sulfur crude oil, salt fox, organic and inorganic compounds |
About Center Enamel
Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China, but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61 and NFPA etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 60 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition.
Project References
