|
[China]
Trade Verify
Address: Fuli Commercial Center room 301#, Xingang West Rd.11#, Haizhu area, Guangzhou, Guangdong province, China.
Contact name:melody wong
Shijiazhuang Zhengzhong Technology Co., Ltd |
|
Verified Suppliers
|
|
|
Glass Fused To Steel And Stainless Steel Waste Water Storage Tanks for Biogas Plant
Glass Fused To Steel And Stainless Steel Waste Water Storage Tanks are the leader of water storage solutions, which is widely used as Waste Water Storage Tanks for Biogas Plant, Waste Water Treat Plant (WWTP) etc. With the advantage of both GLASS and STEEL, Glass lined waste water storage tanks can resist corrosion of Waste Water of PH 1 - 14. our glass lined waste water storage tanks engineers make tank engineering calculation on each specific tank structure according to project local environmental conditions, such as snow load, wind speed, seismic zone etc., to make sure the glass lined waste water storage tanks structure's adequate security in long-term service life.
Glass Fused to Steel Waste Water Storage Tanks
Glass-Fused-to-Steel Waste Water Storage tanks are fusing two materials at 820°C-930°C high temperature to achieve the best properties of both the strength and flexibility of steel and the corrosion of resistance of glass. Glass-Fused-to-Steel Waste Water Storage tanks can provide many advantages over standard epoxy or welded painted storage tanks. Glass-Fused-to-Steel technology is the premium coating technology in the storage tanks market.
Glass Fused to Steel Waste Water Storage Tanks Specifications
| Coating color | dark blue, dark green, white, and customized |
| A standard steel plate size | effective size 2400mm x 1200 m |
| Steel plates thickness | 3mm - 12mm, depends on the diameter & height |
| Coating thickness | 0.25mm - 0.4mm, two coatings internal and external |
| Acid and alkalinity proof | standard coating suits for PH3 - PH11, special coating suits for PH1 - PH14 |
| Adhesion | 3,450N/cm |
| Elastic | same as steel sheet, around 500KN/mm |
| Hardness | 6.0 Mohs |
| Service life | >30 years |
| Spark test | >1500 V |
| Permeability | gas and liquid impermeable |
| Easy yo clean | smooth, glossy, inert, anti-adhesion |
| Corrosion resistance | excellent! Suitable for wastewater saltwater, seawater, high sulfur
crude oil, salt fox, organic and inorganic compounds |
Stainless Steel Waste Water Storage Tanks
Stainless steel Dry Bulk Storage tank is assembled by stainless steel plates, bolts, special sealant, etc. It is an innovation in the installation of stainless steel welded tanks. The tank uses SUS304, SUS316L, and SUS444 stainless steel plates, which meet the OCr18Ni19 sanitary inspection standards and have the characteristics of lightweight, low cost, sanitary and environmental protection.
Waste Water Storage tanks selection should be an important aspect of facility planning, and the support of an experienced and knowledgeable partner will significantly enhance the overall. Our Waste Water Storage tanks specialists are at the forefront of the industry in the engineering and construction of Waste Water Storage tanks. We design, manufacturer and install storage tanks to provide you with the most advanced Waste Water Storage solutions for the best value in the industry.
Project Reference
