|
[China]
Trade Verify
Address: Fuli Commercial Center room 301#, Xingang West Rd.11#, Haizhu area, Guangzhou, Guangdong province, China.
Contact name:melody wong
Shijiazhuang Zhengzhong Technology Co., Ltd |
|
Verified Suppliers
|
|
|
Glass Fused to Steel Anaerobic Digestion Tanks For Wastewater Treatment Plant
What is Glass Fused to Steel Anaerobic Digestion Tanks?
Glass fused to steel anaerobic digestion tank is superior in corrosion resistant as it is actually the combination of “glass” and “ steel “. So glass fused to steel anaerobic digestion tank has the advantages of both: superior corrosion resistant of glass, and strength and flexibility of glass. This is the combination of both to achieve the best . Glass fused to steel anaerobic digestion tank is the best tank to be used as an anaerobic reactor, especially when the media inside than tank could be highly corrosive.
Wastewater Treatment
As you know if we discharge wastewater directly, then the earth will be polluted our health is threatened. There are many bacteria and other dangerous materials in the wastewater. Doing the wastewater treatment, many bacteria will be moved, there is no danger to human health or unacceptable damage to the natural environment.
The glass fused to steel anaerobic digestion tank is widely be used in wastewater treatment. For the wastewater treatment, the first process is doing pretreatment, the purpose is to remove the large solids from the wastewater. The next step is the primary treatment, which need clarification and sedimentation tank to finish this process, the purpose is to remove the suspended solids and biochemical particulate from the wastewater.
After finished the pretreatment and primary treatment, it needs to do the secondary treatment. For the secondary treatment, it requires anaerobic microorganism facilities ( most of the wastewater treatment uses this facility to do the wastewater treatment ) to do it. The purpose of it is to remove the remaining suspended solids and BOD. Wastewater treatment facilities utilize anaerobic digester ( Glass fused to steel anaerobic digester tank ) to break down sewage sludge and eliminate pathogens in wastewater.
Specification of glass fused to steel anaerobic digestion tank
| Coating color | dark blue, dark green , white, and customized |
| A standard steel plate size | effective size 2400mm x 1200 m |
| Steel plates thickness | 3mm - 12mm , depends on the diameter & height |
| Coating thickness | 0.25mm - 0.4mm, two coating internal and external |
| Acid and alkalinity proof | standard coating suits for PH3 - PH11, special coating suits for PH1 - PH14 |
| Adhesion | 3,450N/cm |
| Elastic | same as steel sheet , around 500KN/mm |
| Hardness | 6.0 Mohs |
| Service life | >30 years |
| Spark test | >1500 V |
| Permeability | gas and liquid impermeable |
| Easy yo clean | smooth, glossy, inert, anti-adhesion |
| Corrosion resistance | excellent ! Suitable for waste water salt water, sea water, high sulfur crude oil, salt fox, organic and inorganic compounds |
About Us
Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61 and NFPA etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 60 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition.
