Active Member
|
[China]
Address: Daziwen Town Industrial Zone, Anping County, Hengshui City, Hebei Province
Contact name:admin
Anping Jiongcan Hardware Mesh Products Co., Ltd |
|
|
Hot dip galvanized steel grid plate, also known as hot dip
galvanized steel grid plate, is made of low carbon steel flat steel
and twisted square steel horizontal and longitudinal welding grid
building materials.
Hot dip galvanized steel grid plate has strong impact resistance,
strong corrosion resistance heavy load capacity, elegant and
beautiful, in the municipal roadbed and steel platform construction
projects have superior performance.
High cost performance, hot dip galvanized steel grid plate is
widely used in the new and old roadbed paving ditch road
construction project, hot dip galvanized steel grid plate surface
after special hot dip galvanized treatment, its chemical and
physical characteristics are stable, not easy to be corroded by air
and microorganisms oxidation.
It can obviously enhance the trench load force.
Prevent collapse.
The hot dip galvanized steel grates with flat steel spacing of 3 cm
are of great impact resistance and have the characteristics of
maximum span.
The longer its service life is, it is generally within the range of
40-50 years.
Hot-dip galvanized steel grating is a very good steel frame
structure and weighing platform if no destructive factors are
considered to be involved.
Material Standard | ASTM A36, A1011, A569, Q235, S275JR, Stainless steel 304/316, | |||
Bearing Bar | 25x3, 25x4, 25x4.5, 25x5, 30x3, 30x4, 30x4.5, 30x5, 32x5, 40x5,
50x5, 65x5, 75x6, 75x10…..100 x10mm etc; | |||
Bearing Bar Pitch | 12.5, 15, 20, 23.85, 25, 30, 30.16, 30.3,32.5, 34.3, 35, 38.1, 40,
41.25, 60, 80mm etc. | |||
Twisted Cross Bar Pitch | 38.1, 50, 60, 76, 80, 100, 101.6, 120mm, 2'' & 4'' etc | |||
Surface Treatment | Untreated(black), Hot-dipped galvanized, Powder coated, Electroplate, Painting or as per customers' requirement. | |||
Grating Style | Plain / Smooth, Serrated / Teeth, I bar, Serrated I bar | |||
Packing | (1) Bandage and Paperboard: Generally applies to neat steel plate; | |||
Payment Term | T/T or L/C | |||
Raw material: toothed flat steel: the general material is Q235, the
difference between toothed flat steel and ordinary flat steel is
that one side of the flat steel has uneven tooth marks.
(Mainly in the skid.
We mainly use the longitudinal shear flat steel, and a steel plate
cut) twist steel: also known as twisted square steel, there are
generally 5X5 6X6 8X8 square steel, twisted bar.
With the increase of the types of anti-skid tread board, with the
improvement of people's safety awareness, many responsible
factories in order to avoid the direct economic losses caused by
accidental injury of employees, to ensure the safe operation of the
workshop, gradually improve the scope of application of anti-skid
tread board.
Because of the anti-skid tread plate has good anti-skid and beautiful, so in the industrial plant, production workshop, transportation facilities and other aspects has a wide range of uses, used in public places of the aisle, workshop, site.Reduce the inconvenience caused by slippery road surface, protect personnel's personal safety, and bring convenience to the construction.It plays an effective protective role in special environment.
High strength, light structure: the solid grid pressure welding structure makes it has the characteristics of high load, light structure, easy to hoisting and so on;Beautiful appearance, durable.
1. Strength, light weight;
2. Strong anti-corrosion ability, durable;
3. Beautiful appearance, bright surface;
4. No dirt, no rain and snow, no water, self-cleaning, easy to
maintain;
5. Ventilation, lighting, heat dissipation, anti-skid,
explosion-proof;
6. Easy to install and disassemble.
Steel plate process with manual welding process and welding machine
process, surface treatment of hot dip galvanizing and painting, the
composition of ordinary steel plate is made of flat steel and twist
steel welded together, is composed of flat steel welded with
special specifications, steel grid plate can be divided into common
flat steel and sawtooth toothed plates, serrated flat non-slip
effect is more outstanding.
The connection mode of steel grid plate is fixed and installed with
buckle connector, which is composed of three parts.
Hot-dip galvanized steel grid plate can be installed in two ways:
welding and clamping.The advantages of welding are permanent fixation, not loosening,
specific position in the first flat steel at each corner of the
steel grid plate, the length of the weld is not less than 20mm, the
height is not less than 3mm of fillet welding.The advantages of the mounting clip are that it does not destroy
the hot dipping zinc layer and it is easy to disassemble. Each
plate needs at least 4 sets of mounting clips. The number of
mounting clips increases with the increase of the length of the
plate.The safest method is to weld the screw head directly to the beam
without clamping down, so that the steel grille plate will not slip
from the beam due to the loosening of the clamping.
Pre-sale service:
After the customer orders, we will have professional technical personnel to contact with the customer, in order to meet the customer's technical inquiry and production schedule.
