|
[China]
Trade Verify
Address: No.70 Chezhan North Road,Changsha,Hunan,China
Contact name:James Yang ( HUAIYU YANG)
China Hunan High Broad New Material Co.Ltd |
|
Verified Suppliers
|
|
|
ZK60A T5 Extruded / Cast Magnesium alloy round billet ASTM B80 Diameter 110 mm
Type
| Available size or customized | |
| ZK60A | Φ100mm,Φ120mm,Φ260mm,Φ482mm |
| AZ31B | Φ100mm,Φ120mm,Φ181mm,Φ201mm,Φ230mm,Φ260mm,Φ482mm |
| AZ61A | Φ100mm,Φ260mm,Φ482mm |
| AZ80A | Φ100mm,Φ260mm,Φ482mm |
| WE43B | Φ120mm,Φ260mm |
| 99.80A | Φ181mm,Φ201mm,Φ230mm |
| M1C | Φ120mm,Φ181mm,Φ201mm,Φ230mm |
| M1A | Φ181mm,Φ201mm,Φ230mm |
| MnE21 | Φ120mm,Φ181mm,Φ201mm,Φ230mm,Φ260mm,Φ482mm |
Applications: Suitable for magnesium and magnesium alloy processing products, plates, belts, tubes, rods, profiles and wire rods, as well as alloy ingots and slabs.
Executive Standard: GB/T5153-2003 ASTM?B107/B107M-92 Conventional product material: AZ31B, AZ91D, AZ61A, ZK60, ZK61 and so on.
Compared with cast magnesium alloys, semi-continuous casting casting magnesium alloys are finer in structure, more uniform in composition, denser in interior, and have higher strength and higher elongation than cast magnesium alloys.
1 Through pipetting, secondary scouring, high purity and low impurity, the magnesium liquid is poured directly from the heating and holding furnace to rapidly crystallize, which improves the denseness of the internal metallographic structure of the magnesium rod, and the internal crystal is more reasonable and compact. Physical properties It is also greatly enhanced over traditional cast products.
2 The slag content of flux in molded products tends to be zero, that is, the semi-continuous alloy adopts the new inert gas protection device in the current magnesium smelting industry, which changes the smelting process in the traditional process to be completely exposed to the air, and can only rely on flux and other flame retardants. The material is the most flame-retardant method in magnesium molding products, which greatly reduces the flux slag content and improves product quality.
3 The surface is smooth and clean, no air hole, shrinkage hole, slag inclusion.
4 Flexible length and length, existing specifications Φ 93, Φ 112, Φ 170, Φ 212, Φ 217, Φ 230, can be stripped and cut according to user requirements. In addition, other products with different specifications can also be produced to meet customer requirements. .
5 It is also possible to semi-continuously cast a variety of magnesium alloy flat bars (eg: 200mm x 500mm thick)
Contact us for details:
Vivian Jiang
-----------------------------------------------
China Hunan High Broad New Material Co.Ltd.
70 Chezhan North Road,Changsha, China 410100
Tel:+86-731-85717705 Fax:+86-731-85716569
Mobile/Whatsapp: +86-139-7488-3816
Email: vivian@hbnewmaterial.com
Skype: vivian.jjy
