|
[China]
Trade Verify
Address: No.70 Chezhan North Road,Changsha,Hunan,China
Contact name:James Yang ( HUAIYU YANG)
China Hunan High Broad New Material Co.Ltd |
|
Verified Suppliers
|
|
|
MgZr Magnesium Zirconium Master Alloys with Mg Zr different ratio,MgZr35 magnesium alloy billet MgZr30 MgZr25 MgZr
Grade: Zr 10% 20% 30% 35%
Mg balance
Shape: bar ingot
Application: refine grain
| Name | Mg | Zr | Fe (max) | Si (max) | Cu (max) | Ni (max) | Al (max) | Co (max) | Other Total (max) | |
| MgZr | 25% | 74%-76% | 24%-26% | 0.003% | 0.01% | 0.005% | 0.001% | 0.01% | 0.01% | 0.5% |
| MgZr | 30% | 69%-71% | 29%-31% | 0.003% | 0.01% | 0.005% | 0.001% | 0.01% | 0.01% | 0.5% |
| MgZr | 35% | 64%-66% | 34%-36% | 0.003% | 0.01% | 0.005% | 0.001% | 0.01% | 0.01% | 0.5% |
| MgZr | 40% | 59%-61% | 39%-41% | 0.003% | 0.01% | 0.005% | 0.001% | 0.01% | 0.01% | 0.5% |
Magnesium-zinc-zirconium alloy (magnesium-zinc-zirconium alloy) is
a high-strength ternary magnesium alloy.
Zinc plays a role of solid solution strengthening and forms a
strengthening phase. Zirconium can refine the structure, slow down
the diffusion rate of the alloy, and prevent the growth of crystal
grains. It has good casting performance, hot workability and
corrosion resistance, but the production process is more
complicated and the segregation tendency is greater. It can be
strengthened by heat treatment, and it can be used in quenching and
aging state. The commonly used grades for casting
magnesium-zinc-zirconium alloys are ZM1 and ZM2. The commonly used
grade of wrought magnesium forging alloy is MB5. ZM1 has high
strength and low wall thickness sensitivity. It is mainly used for
high-strength, impact-loaded parts in the aviation industry, such
as aircraft hubs, rims, brackets, etc. ZM2 has good castability and
is mainly used for parts with higher working temperature in the
aviation industry, such as engine mounts and motor housings. MB5 is
used for extruded products and die forgings with high strength and
ductility.
Magnesium-zirconium alloy: MgZr25 MgZr30 MgZr35
Magnesium germanium alloy: MgY25 MgYr30 MgY35
Magnesium-antimony alloy: MgNd25 MgNd30 MgNd35
Magnesium-antimony alloy: MgGd20 MgGd25 MgGd30
Magnesium germanium alloy: MgCe25
Magnesium-antimony alloy: MgSr10 MgSr15
Magnesium-antimony alloy: MgLa5 MgLa25??6??7
Magnesium-calcium alloy: MgCa10 MgCa15
Magnesium-manganese alloy: MgMn2 MgMn5
In order to facilitate users to add alloy smelting, a small ingot mold (0.5Kg×6/block structure) is used to increase the melting speed, and the weight of each small spindle is basically maintained at about 0.5Kg. High content of ingredients. Addition of calcium before casting magnesium alloy can reduce the oxidation of the melt, and refine the alloy grains, improve the rolling ability of the sheet, the presence of calcium can also reduce the micro-cell effect of magnesium alloys.
1. Mg master alloys:
MgY25/30, MgMn3/5/10 , MgCa15/20, MgCe20/25/30, MgNd20/25/30, MgSc2/5/10/30, MgGd20/25/30,MgSr10/20, MgLa20/25/30,MgZr25/30,MgEr20,MgAl50/68,MgCu15/30,
MgLi10,MgSi3 ,MgDy20/30,MgSm20, MgPr20,MgHo10, MgCd20,MgBa10 ,MgZn30,MgLaCe,NiMg etc.
ZK60, ZM2,ZM3,ZM6,ZM21,ZM31,WE43,WE57,WE94,MnE21 ,WZ73,Dissolving magnesium etc.
For Magnesium alloys, we have strong technical team to supply customized alloy according to customers demand.
2.Al master alloys:
AlCu,AlNd,AlGd,AlY,AlZn,AlEr,AlLa,AlCe,AlSc,AlScZr,AlCo,AlCr,AlMo,AlNb,AlLi,AlAg,AlYb,AlHf,AlDy,AlRe10 ,AlTiC ,AlIn, AlSn etc.
3. Cu master alloys:
CuBe,CuTi,CuZr,CuCr ,CuP ,CuAl,CuMg ,CuCd , CuSn,CuCa,CuCe,CuFe,CuSi,CuTe,CuV,CuAg,CuLi,CuMn,CuCo,CuAs,CuSb,CuB, etc.
4. Zn master alloys:
ZnLi2, ZnLiCu, ZnMn10,ZnY3, ZnLa,ZnRe etc.
Contact me for more details:
Vivian Jiang
