600mN.M 1.5A Hybrid Stepper Motor NEMA 17 0.9 Degree For Automation Equipment

Hybrid Stepper Motor NEMA17 0.9 Degree 600mN.M Stepper Motor 1.5A For Automation Equipment

Casun Stepper motor 600mN.m 5.45V DC Nema 17 Hybrid Stepper Motor 42x42x60mm with factory price

Degree: "0.9 Degree" refers to the step angle of the stepper motor. It indicates the angular increment per step that the motor takes when receiving a command.

Phase: "2 Phase" means that the motor has two separate windings, also known as phases, which are energized in a specific sequence to make the motor rotate.

Voltage: "5.45V DC" represents the recommended or rated voltage for operating the stepper motor. This is the voltage that should be applied to the motor for optimal performance.

Size: "424260mm" indicates the physical dimensions of the motor. The NEMA 17 standard specifies a flange size of 42mm by 42mm, but the height dimension of 60mm suggests that this particular motor may be slightly longer than the standard NEMA 17 size.

Holding Torque: "600mN.m" represents the holding torque of the motor. Holding torque is the amount of torque the motor can generate to maintain its position when no external force is applied. In this case, the motor has a holding torque of 600 milliNewton-meters.

Features:

• Bipolar or unipolar versions available

• For high-tech industry and electronic industry equipment

• Available in single or double shaft versions

• Provide "multiple international certifications"

• Professional research and development manufacturing

Motor Specifications

Operating Specifications

Step Angle: 1.8°

Maximum  Temperature :80°C maximum

Ambient Temperature: -20 °C to 50°C

Storage Temperature -20: °C to 100°C

Humidity Range (%) :85% or less, non-condensing

Magnet Wire Insulation :Class B 130 deg C

Insulation Resistance :100M Ohm at 500 VDC

Dielectric Strength :500 VDC for 1 min

Torque Curves 

Submodels

Download

If our standard motor cannot meet your needs,

we can customize the motor according to your needs

Customized content includes but is not limited to special shafts, winding parameters, installation dimensions, lead wires with special requirements, connectors, etc.

Options:

Encoder	Brake	Gearbox	Shaft

Please click the "Get a quote" button below to tell us your requirements.