|
[China]
Trade Verify
Address: Room1190,No.106 xinling road China(shanghai), pilot free trade zone
Contact name:Cherry
SHANGHAI E&V IMPORT AND EXPORT CO.,LTD |
|
Verified Suppliers
|
|
|
16mm-6.8mm Brass Copper Rod Cold Continuous Rolling Mill
I. Detail information
The unit is used for copper rod cold rolling. Invented,designed and
produced by our own company ,the rolling machine having many
patents for invention at home and abroad ,used by many company on
global,high quality .Through cold rolling, the mechanical behavior can be raised and the
defects from casting can be also fetched up. The producing capacity
is 2.5ton / hour when roll from Φ17mm to Φ6.8mm.
II. Advantage
i) Stable product quality;
ii) Low energy consumption;
iii) Roll all kind of section
iv)Separate motor
v) Quickly change rollers
vi) Reasonable price
III.Main parameter
| No. | item | Parameter |
| 1 | Model: | Copper rod cold rolling mill, copper alloy cold rolling mill. Other metal rod cold rolling mill, other alloy cold rolling mill,copper / aluminum continuous casting and rolling etc. |
| 2 | Input dia | Ф55mm,Ф35mm,Ф25mm,Ф20mm,Ф17mm,Ф16mm,Ф14.4mm,Ф12.5mm,Ф8mm etc. |
| 3 | Output dia | Ф20mm,Ф18mm,Ф17mm,Ф8mm,Ф6mm,Ф5mm,Ф4mm,Ф3 mm etc. |
| 4 | Outlet rod out of roundness | No more than 0.2mm after rolling, or more accurate |
| 5 | Rolling pass | 2-16 or as each customer’s requirements |
| 6 | Rolling speed | Max 3M/s for continuous rolling, Max 5M/s for discontinuous rolling. |
| 7 | Pass schedule | ellipse-round hole type system or triangular -round type system |
| 8 | total extend compression ratio | 2-10, or as each customer’s requirements |
| 9 | each pass compression ratio | 1.15～1.4(hole type can change) |
| 10 | Total power | 100kw～500kw |
| 11 | Running mode | Each frame separate transmission speed controlled by frequency or AC servo |
| 12 | Operation mode | PLC control, touch screen display,can improve to DCS control or networking |
| 13 | type | 2 high horizontal- vertical or 3 high positive triangle-inverted triangle |
| 14 | nominal roller dia | Ф200mm(double-groove/multi-groove),Ф248mm(double-groove/multi-groove),Ф264mm,Ф300mm,Ф370mm,Ф400mm etc. |
| 15 | No. of frame | 2-16 or more |
| 16 | Main motor | 11kw-110kw AC frequency motor or AV servo motor for each |
| 17 | roller material | other imported material etc. |
| 18 | rolling mill size | a complete production line: length 18m *width 6 m*height 2.5m |
| 19 | height of center | height from the ground 1230mm |
IV. Technical process
Check the device→Touch screen enters to the normal working
screen→Open the oil pump
↓
Open the emulsion pump
↓
The increase the speed and turn into ← Rolling the copper rod
← Start the rolling mill
nomol production
V.Main component
1. Rolling mill base (including frame, reducer, motor etc)
2. Guide system
3. Pay-off frame
4. coiling take-up system
5. Lubrication system
6. Emulsion system
7. Electronic control system
8.straightening device
55mm, 35mm, 25mm, 20mm, 17mm, 16mm, 14.4mm, 12.5mm, 8mm
20mm,18mm, 17mm, 8mm, 6mm, 5mm, 4mm, 3mm
Dear friends,
welcome to contact with us!
