Active Member
|
[China]
Address: 206, Qiaotou Community, Fuyong Street, Baoan District, Shenzhen, China
Contact name:Cindy Huang
Shenzhen rCloud Technology Co.,Ltd |
|
|
Bi-directional Black Manual Magnetic Card Reader Writer with USB/RS232C/PS/2 interface
OVERVIEW
This product is hand swipe operated magnetic card reader/writer machince with USB interface.They according to ISO7811/7812 magnetic card decoding standard completely.It can read card bi-directionally,has intelligent lights to alert if card data is read correctly.Delicate magnetic installation structure makes card reading more stable and reliable.This card reader accepts both high and low coercivity magnetic cards.
FEATURES
ØBi-directional swipe reading
ØBuzzer or wide voltage optional
Ø USB/RS232C/PS/2 interface; Bi-directional card reader
Ø Reads credit cards, bank cards, driver's licenses and ID cards
Ø All tracks are available (Tracks 1, 2 and 3)
Ø Small in size, easy to handle
Ø Reads low and high coercivity cards (300 to 4000 Oe)
Ø Low power consumption, good compatibility
Ø Readers can be affixed to most computer keyboards or to any flat surface.
ØCE/FCC certificate
Ø LED for status
Ø Watch dog
SPECIFICATIONS
Interface :
USB-keyboard;USB-serial;USB-HID PS/2
Serial
Cable connector:
USB: standard usb
PS/2: standard PS/2
Serial: RS-232 DB9/ TTL 4pin
| Electrical | |||
| Power requirements | ‘+24VDC +/- 5% | ||
| Consumption | Typical 350mA Max. 600mA plus for each writing track | ||
| Power supply | External switching power 9V/2.5A | ||
| Communication Interface | USB | ||
| Ripple | 50mVp-p or less | ||
| Dielectric strength | 500 VDC for 1 minute | ||
| Performance | |||
| Track | Track1 | Track2 | Track3 |
| Recording density | 210 BPI | 75 BPI | 210 BPI |
| Record characters | 52 Characters | 25 Characters | 73 Characters |
| Coercive force | Read/write 300-4000 oe Mag.card | ||
| Card thickness | 0.76-1.2mm | ||
| Read speed STD card Jitter | ’ +/-15% Amp. 60% | ||
| Write speed | 5-30ips | ||
| Write jitter | Interval < +/- 10%, Sub-interval < +/- 12% | ||
| Error rate | Read < 0.5% | ||
| Write < 0.8% | |||
| Head life | Min. 1000K swipes for both read/write head | ||
| Mechanical | |||
| Body material | ABS 94V-0 | ||
| Weight | Approx. 1.4kg | ||
| Dimension | 212L x 64W x 63H mm | ||
| Swipe Manual | single direction | ||
| Environments | |||
| Operation humidity | ‘-10 to 55oC, 10 to 85% | ||
| Storage humidity | ’-30 to 70oC, 10 to 90% | ||
| Safety Approval | Rating FCC , CE , UL, cUL | ||
Package including
Card reader&writer
Software
Power adaptor
USB cable
English Manual
Test Magnetic Card
Operating:
Ø Standards: ISO/ANSI/AAMVA/CA DMV
Ø Recording Method: Two-frequency coherent phase (F2F)
Ø Message Format: ASCII
Ø Card Speed: 10cm/sec. ~140cm./sec (5 ips ~55 ips)
Ø MTBF: Electronics - 100,000 hours; Head Life - 500,000 passes
Usage:
1 . Connect card reader to PC or terminal
2 The green light and red light on ,then buzzer call .It will The red light and buzzer off after 0.5s ,then it will be in ready status .,
3 When the magnetic card was swipped and the data is right ,the buzzer will ring and 3 second off .Otherwise ,the red light will be on and buzzer bilnk three time (interval is 1s) ,then enter into awating status.
Dimensions :
Ø Size: L 90 x W 27.5 x H 28 mm
Ø Weight: < 250g
Ø Color: Black
Warning &maintance
1 If in dirty ,scratched ,deformed the card can’t be used .
2 The cards can’t be put near to magnetic object or humid place.
3 After a period of time ,the card reading should be maintained.If the surface covered with dust then it will have an affect on the data .
The maintance method: The card head should be in Periodic maintenance. Swipping cards by clean card with alcohol and wash card head .
