Wuhan Kingdrilling Diamond Co.,Ltd |
Verified Suppliers
|
|
Product name: 159mm MK5E eccentric casing drilling bit with DHD340
shank for Mining and Quarry
Product category: eccentric casing drilling system
Matched hammer: Hammer DHD340 QL40 MISSION40
Matched casing pipe OD: 159mm
Kingdrilling drilling solutions are designed to deliver
industry-leading returns in sample quality and drilling
productivity in the exploration for gold, silver, platinum, copper,
nickel, iron ore, and other base metals.
Supported by on-site support and consultation from our expert
regional teams, kingdrilling systems have earned their reputation
as The Driller’s Choice.
MK5E eccentric casing drilling bit technical parameters
Technical Parameters | |||
Model | Reaming Diameter(mm) | Casing Diameter(mm) | Equipped Hammer |
MK5E108 | 115 | 93-99 | 90 |
MK5E127 | 130 | 115-117 | 110 |
MK5E146 | 155 | 130-134 | 110/340 |
MK5E168 | 185 | 148-156 | 110/340 |
MK5E178 | 195 | 158-166 | 150/340 |
MK5E183 | 196 | 168-176 | 350/360 |
MK5E193 | 206 | 176-182 | 360 |
MK5E219 | 236 | 199-207 | 360 |
Order Guide: Casing Tube OD & ID + Reamer Bit Diameter + Minimal Casing
Shoe ID + Hammer Shank Style
Casing drilling system Advantages:
1. Straight Holes and Fast Penetration Rate
2. Less Torque in all ground conditions
3. Easy System to lock and Unlock Ring
4. Drilling at any angle required
5. More Holes and Low investment
FAQ:
1. What is odex drilling?
ODEX is an adaptation of the air-operated down-the-hole hammer. It
uses a swing-out eccentric bit to ream the bottom of the casing.
Cuttings blow up through the drive sub and casing annulus to a
swivel conducting them to a sample collector or onto the ground.
Rapid removal of cuttings.
2. Where do they put overburden?
The most common use for the large volumes of overburden produced by
a surface mine is to remediate and reclaim the area where it was
first removed. Putting the sand, rock, and clay back where it came
from helps rebuild the level of the soil so that plant life can
return.
3. How does a casing advancer Work?
The Casing Advancer has been designed to allow drilling and casing
to be carried out at the same time as one integral operation. This
feature eliminates the need to drill the large diameter hole with a
Rock Bit, pull the drill rod string and Rock Bit from the hole and
then ream the casing back into the hole.
More information: