Active Member
|
[China]
Address: 6th Floor , New Century Hotel, 43 XiuQuan Avenue, Huadu District, Guangzhou City, Guangdong Province, China
Contact name:Lu Jutao
Guangzhou City Shenghui Optical Technology Co.,Ltd |
|
|
Product Name: Matte Metal Green Tooth Car Wrap Film Air Release Swipeable
Product Description:
Car wrap film is a process of transforming the color and looks of your car by applying large sheets of pressure-sensitive vinyl film to each individual panel on the car. Carbon fiber vinyl wrap film is applied with extreme precision and skill and can only be carried out by highly trained and specialized staff.
Product Specfications:
| 1. Face Film | Type: | Polymeric Calendered Vinyl Film | Thickness: | 120 µm |
| Surface Finish: | Matte | Color: | Matte Metallic | |
| 2. Adhesive | Type: | Clear Removable Acrylic Adhesive | ||
| Thickness: | 30 µm | Color: | Clear | |
| 3. Liner | Type: | Air-Egress PE-coated Paper Liner | Thickness: | 140gsm |
| 4. Max Durability | Up to 5-7 years | |||
| 5. Product Size | Width | Length | ||
| (metric/m) | (Imperial/inch) | (Metric/m) | (Imperial/yard) | |
| 1.27 | 50 | 18 | 20 | |
| 1.52 | 60 | 23 | 25 | |
| Notice: There is a Minimum Order Requirement for Special Product
Size. | ||||
Product Application:
￭ Trailers
￭ Buses
￭ Trucks
￭ Cars & Vans
Advantages of Applying Car Wrap Film:
Product Features:
FAQs:
Actually, car wrap can protect your paint because it blocks damaging ultraviolet light. When you remove it, the original finish will be intact.
Hand washing is best for vinyl wraps, but brushless or touchless car washes can be just as safe. You can even use a pressure washer if you’re gentle.
1.Use your fingernail or plastic scraper to pull the wrap from the edges of the entire panel. It’s going to look gnarly, but it’ll all be gone in a few minutes.
2. Use the heat gun to evenly heat the surface of the wrap to about 120 °F (50 °C). This will loosen the adhesive so you can pull it off. Use a non-contact infrared thermometer to confirm you aren’t overheating, which can lead to excessive adhesive residue left on the surface.
3.Finally, use Turtle Wax Label & Sticker Remover or Bug & Tar Remover to remove any adhesive residue from the surface of the panel.
4.Pull the wrap away from the edges at a steep angle, pulling the wrap back on itself at 15 to 20 degrees. When the wrap gets hard to pull, reheat and start pulling again.
The best way to ensure a wrap will last is to keep the car in a garage. If you don't have a garage, invest in a good car cover. You should handwash the car with soft microfiber towels. Automatic car washes are off-limits: The harsh brushes could scratch or lift off the wrap.
