|
[China]
Trade Verify
Address: Xiaowu 1st Industrial Area, Xiaowu Village, Dongchong Town, Nansha, Guangzhou, China
Contact name:Johnson
Guangzhou HS Machinery Co., Ltd. |
|
Verified Suppliers
|
|
|
Corrugated Packaging Printing Slotting Inline Case MakerMachine
Model: 2200x5200
Technical parameters:
Max. sheet: 2200x5200mm
Min. sheet: 500 x 1800mm
Max. Printing area: 2200x5200mm
Min. Printing area:500x1800mm
Paperboard thickness: 3-9mm
Design speed: 40 sheets / min.
Dimension: 39210 x 8530x2500mm
Total power: 325.2KW
Total weight: 168.26 Tons
Iron wall thickness: 90 mm
Cliche thickness: 3.4mm, 3.7mm, 3.8mm,7mm.
Printing tolerance: +1.5mm
Folding error:+1.5mm
Features
1. The bottom printing printer slotter die cutter in line case maker consists of lead edge feeder,bottom printers, slotter, die cutter in line case maker, counter ejector and delivery section.
2. All the units can move, all the rollers gap adjusted by PLC and touch screen, all the electric parts are Siemens.
3. Gears are made of 20CrMnTi,HRC 55-62, class 6 precision. Main Bearings SKF, the others are of NSK.
4. Pull roll transfer at all printing units.
Ceramic anilox rollers with LPI arrangements within 220
Die cutting unit(Independent Servo control)
Die cutter roller made of steel moulding material and plated with rigid chrome and grinded surface
1) Anvil cover roller diameter 281 mm,steel-moulding material is plated with rigid chrome and grinded surface
2) Die cutting roller and anvil cover roller gap adjust by electric control
3) Feeding roller gap adjusted by PLC and touch screen
4) The feeding rollers are grinded and plated with rigid chrome, make blance rectification for running stable.
5) Die cutting roller circular movement is controlled by PLC, touch screen control and electric numerical adjustment of 360°(running and stopping can be adjusted)
6) Depair and Maxdura anvil cover for option
7) Anvil cover repairing knife installed
8)Independent Servo driving.
Forming section
Use servo system to parallel the jumbo size paperboards to walk forward straightly. At the same time precreasing and creasing system will further precrease and crease for nice folding. Electrical fans to blow away and clear off the slotted and die cut scraps for smooth gluing and folding. This section can well match the working speed before paperboards enter the folding beams.
1) Double shaft slotting unit consists of pre creasing wheel, first slotting, creasing wheel and second slotting
2) Creasing wheel with PU Plated for good creasing and avoiding paper crack
3) Pre creasing roller and creasing roller gap adjusted by touch screen control
4) Creasing rollers diameter:110mm,plated with rigid chrome and grinded surface,treated by balance rectification.
5) Slotting holder rollers diameter:124mm,plated with rigid chrome and grinded surface,treated by balance rectification.
6) Cast steel slotting guide plates makes slotting precise and never damage the slotting knife.
7) 9 Crsi Slotting knives
8) All the knives move and slotting holder move adjusted by PLC control
9) Slotting holder rollers gap adjusted by electric control
Folder gluer
Feeding section
1) Feeding mouth in back of die cutting unit of printer
2) Glue Spray system installed---VALCO SPRAY GLUING SYSTEM with four guns.
3) Blower install for waste cleaning
Folding section
1.Auxiliary creasing wheel in front section to ensure easy folding
2.All the transmission belts are of good quality and high wear-resistant,long time service life.
3) Convey beams lateral movement by electric control
4) Transmission belt extension can be adjusted by pheumatic system.
5) Upper and down belt speed can be adjusted to help minimize fishtail on the carton joint.
6) Vacuum suction system to make beam transference more smoothly.
7) Special disc mechanism can solve the fishtail problem effectively on the special position on the two folding beams.
