|
[China]
Trade Verify
Address: Xiaowu 1st Industrial Area, Xiaowu Village, Dongchong Town, Nansha, Guangzhou, China
Contact name:Johnson
Guangzhou HS Machinery Co., Ltd. |
|
Verified Suppliers
|
|
|
| Model | 1600x3600 |
| Max. Speed (pcs/min) | 160 |
| Max. Feeding Size (mm) | 1600×3600 |
| Min. Feeding Size(mm) | 450×600 |
| Skip Feeding(mm) | 1900×3600 |
| Max. Printing Size (mm) | 1600×3560 |
| Min. Slotting(L:mm) | 260×65× 260×65 |
| Min. Slotting (R: mm) | 130×130× 130×130 |
| Max. Slotting Depth (mm) | 400 |
lServo type None-pressure Lead edge feeder with vacuum suction, wind is adjustable depend on sheet, make sure feed sheet smoothly.
lMain motor with start protecting device, machine cannot run when machine units aren’t lock.
lContinuous or skip feeding available
lDouble feed rollers wrapped with rubber, with groove prevent overpressure, reduce pressed sheet
lLeft-right baffle adjusted by computer with automatic flap, back baffle adjusted by motorized, front baffle manual synchronous adjust.
lDust clearance bush and fan to clean dust on board. Air outlet can be adjusted as per sheet size
lMachine units move by motorized and move with alarm belling to make sure safety.
lThe independent electric box controls the whole machine, and each group can control the machine alone and operate more simply
Feeding unit
Printer Unit
Quick set and self locking pull collars.
►Anilox roller LPI according to customer requirement.
►The printing roller axial clearance manual adjustment, adjustment
range + 5 mm.
Die-cutting part:
1. Axial position cycling moving automatically
2. Choose excellent durable rubber imported from Taiwan
3. With repair-auto rubber device
4. Track and compensate after lower and upper roller repair
5. Slotting slitting knife is special designed and installed on special fixtures , four blade can sync adjust box height . Load and install is convenient and it can replace rotary slotting machine . Blade incision is smooth
6.Die-cutting roller lift pneumatically and make rubber good when idling and phase adjustment to save cost
7. Rubber shaft axial moving 40mm automatically . Creasing not repeat and improve rubber using life
8. Rubber shaft with repair device auto and can repair 3-4 times
