Rino Packaging Machinery Co., Ltd |
|
Automatic Front Gauge 1450 Flute Laminating Machine For Corrugated
Board
Basic Configuration of Flute Laminating Machine
1. Suitable for laminating of cardboard and corrugated cardboard in
150-600 g/m2 .
2. The vacuum suction-type feeding system can lead the paper
accurately into the machine;cycle stacking planes in a state of
non-stop the next batch of paper stack well, so that more
efficient.
3. Using suction automatic feeding of bottom sheet, according to
the main machine operating speed, continuous automatic tracking.
4. The machine operation is stable, surface paper with corrugated
paper joint very accurate. The corrugated paper never pull ahead,
surface paper's location is easy adjust.
5. Machine uses touch-screen/PLC/servo motor control system, double
frequency control type , the circuit system is stable, and can
automatically display the failure alarm.
6. Automatic gluing, and the glue can be used circulatory, avoid
glue waste.
Main Parameter of Flute Laminating Machine
Model | HF-A1300 | HF-A1400 | HF-A1500 | HF-A1600 |
Max laminating size | 1300mm×1250mm | 1400mm×1250mm | 1500mm×1250mm | 1600mm×1250mm |
Min laminating size | 400mm×400mm | 400mm×400mm | 400mm×400mm | 400mm×400mm |
Economic speed | 0-100sheets/min | 0-100sheets/min | 0-100sheets/min | 0-100sheets/min |
Laminating precision | ±1.5 | ±1.5 | ±1.5 | ±1.5 |
Power | 10kw | 12kw | 12kw | 12kw |
Size | 13.5m×2m×2.4m | 13.5m×2.05m×2.4m | 13.5m×2.15m×2.4m | 13.5m×2.25m×2.4m |
Weight | About 4.8t | About 5t | About 5.2t | About 5.4t |
Bottom paper thickness | A/B/C/E/F flute,2/ 3/4/5/7/ layer , less than 12mm thickness | |||
Surface paper gram weight | 150-600 g/m2 |
Main Units
Top feeding unit
|
Electrical unit
According to the European CE standard design, to ensure that the whole machine is stable, high efficiency, low failure, combined with the man-machine interface and PLC to warn, detection the fault, operating speed and other information displayed on the screen.
|
Factory of Flute Laminating Machine