Active Member
|
[China]
Address: Room 2003, Building 1, Hisense Innovation Valley,High-tech District, Jinan City, Shandong Province, China.
Contact name:Ellen
Rino Packaging Machinery Co., Ltd |
|
|
Fingerless Quick Change Type Single Facer Corrugated Paperboard Making Machine
Introduction of Single Facer Corrugated Machine
1. Vacuum adsorption, equipped with high-pressure blower.
Machine-absorbing silencer with wind control device; the electric
control box is concentrated on the same host, not less than 1.5m,
and the cover is closed on the operating side.
2. Universal joint transmission, separate structure, independent
transmission box, enclosed gear oil-immersed lubrication, can
extend the life of the gear.
3. The corrugated roller has a diameter of Ø320mm and is made of
52CrMo high-quality alloy steel. After quenching and tempering,
hardening and polishing, the surface is chrome-plated with a
hardness of HRC60 degrees, and the cylinder body is controlled up
and down.
4. The diameter of the pressure roller is Ø320mm, which is
processed by 45# carbon steel, and the surface is chrome-plated
cylinder controlled by upper and lower machining and grinding.
5. The diameter of the upper and lower preheating rollers is
Ø400mm, the surface is processed and ground hard chromium plating,
and all metal hose connection
6. Pneumatically controlled glue, rubber roller diameter 215mm,
back polished with pit texture, hard chrome plating, transfer
roller surface processing and grinding off hard chrome plating
7. Corrugated roller bearings adopt high temperature and high
pressure grease lubrication bearings
8. Adopt electrical insulation glue metering device, easy to
operate and good performance
9. The height of one side of the corrugated roller is 0.10mm, and
the height of one side of the pressure roller is 0.075mm. Increase
the spacer device, a pressure cylinder of Ø 160 mm.
10. Electronic components and accessories: Shineider brand, TECO
main engine motor.
11. Pneumatic components, rotary joints, metal hoses: Yadeke,
Tengzhou brand.
Single Facer Corrugated Machine Parameter
Sheet width 1800mm Design speed: 150m/min Running speed: 120m/min | ||
| Name | Configuration | Qty |
SF-LH150 Cassette type Single facer | Cassette type, corrugated roller material: tungsten carbide, diameter: ￠320mm, change corrugated roller in 10 minutes, frequency motor, electric adjust gluing width, adjust glue according to speed | 1set |
| Corrugated fast change part | Ø320mm Tungsten Carbide tile corrugated roller, suction hood, tile sleeve wall panel, swivel joint | 1set |
| Change roller trailer | Hydraulic synchronous lifting, electric traction walking | 1car |
 |  |
Machine Details
* The guide paper adopts wind absorption to maintain the stability of corrugated cord type at high speed.
* By the air blower through the vacuum box will be corrugated in the middle corrugated roller 180 degree range to form negative pressure zone, to complete the rolling of corrugated.
* Under the Corrugated roller suction groove width of not more than 2mm, can be reduced single-sided corrugated cardboard stripe traces.
* The transmission department adopts synchronous Belt drive, isolating the vibration source, making the transmission more stable, running reliably and maintaining higher.
Packaging&Shipping
