Active Member
|
[China]
Address: Room 2003, Building 1, Hisense Innovation Valley,High-tech District, Jinan City, Shandong Province, China.
Contact name:Ellen
Rino Packaging Machinery Co., Ltd |
|
|
Cassette Type Single Facer Machine Corrugated Board Production Line
Introduction of Single Facer Corrugated Machine
* The card box pulls the type to change the corrugated roller quickly. The roll time is about 5-20 minutes.
* Corrugated Roller bottom.
* One machine can be shipped with (a. B. C. E. F. g) Multiple-type
* With the fast-changing single group joints of the pipeline are using fast-changing connectors, easy to operate and fast.
* Fast-changing single group of fixed and separated using lever and cylinder linkage, stable, simple, accurate positioning.
* Drag the use of 5T hydraulic electric car, time-saving, labor-saving.
* Each fast-changing single group with a T-type platform, save space, convenient parking.
* The glue department is independent drive, pulling and locating pneumatic, convenient for maintenance and cleaning. With the back out bracket.
* Control automatic speed adjustment of the size of the glue.
* Electric adjustment rubber surface width.
* With a tile paper humidifier, can improve the flatness of paperboard and production speed.
Single Facer Corrugated Machine Parameter
Sheet width 1800mm Design speed: 150m/min Running speed: 120m/min | ||
| Name | Configuration | Qty |
SF-LH150 Cassette type Single facer | Cassette type, corrugated roller material: tungsten carbide, diameter: ￠320mm, change corrugated roller in 10 minutes, frequency motor, electric adjust gluing width, adjust glue according to speed | 1set |
| Corrugated fast change part | Ø320mm Tungsten Carbide tile corrugated roller, suction hood, tile sleeve wall panel, swivel joint | 1set |
| Change roller trailer | Hydraulic synchronous lifting, electric traction walking | 1car |
 |  |
Machine Details
* The guide paper adopts wind absorption to maintain the stability of corrugated cord type at high speed.
* By the air blower through the vacuum box will be corrugated in the middle corrugated roller 180 degree range to form negative pressure zone, to complete the rolling of corrugated.
* Under the Corrugated roller suction groove width of not more than 2mm, can be reduced single-sided corrugated cardboard stripe traces.
* The transmission department adopts synchronous Belt drive, isolating the vibration source, making the transmission more stable, running reliably and maintaining higher.
Packaging&Shipping
