|
[China]
Trade Verify
Address: Room 602,Building No.9,Hongmei South Road No.1789,Shanghai China
Contact name:Steven
Shanghai Oetex Auto Parts Co.,Ltd |
|
Verified Suppliers
|
|
|
0-1.2MPa Intake Air Pressure Sensor 30mm*30mm*50mm Dimensions
The Manifold Absolute Pressure (MAP) Sensor is a device found in the intake manifold, next to or on the throttle body, and is typically used to measure the intake manifold pressure. With the readings obtained, the Engine Control Unit (ECU) is able to calculate the air density as well as determining the air-fuel mixture required for the combustion process. The pressure sensor also provides other useful data to the ECU, such as, engine load, fuel injection pulse, and ignition timing.
In addition to the functions above, the MAP sensor can also detect any issues with the throttle, analyze for vacuum leak in the intake manifold, and convert the sensor signal into air mass data when in combination with the engine speed and Intake Air Temperature (IAT) sensor.It is also used in OBD II vehicles to make sure the operational health of the Exhaust Gas Recirculation (EGR) valve, and acts as a backup device for vehicles with a mass airflow sensor (to monitor the mentioned system) when such check is required.
Although the manifold absolute pressure sensor is fairly reliable, it can still experience failures that would cause the engine to not start or start improperly, detonation, misfire, poor fuel efficiency, and a lack in power. All of these indicators can be signaled by an illuminated Check Engine Light. The lack of performance may stem from a contaminated, clogged, or damaged sensor due to repeated exposure to intense engine heat and vibration.
| Parameters | Details |
|---|---|
| Vacuum Pressure Sensor | MAP pressure sensor |
| Housing Material | Stainless Steel |
| Temperature Range | -40℃~125℃ |
| Compensation Temperature Range | -10℃~60℃ |
| Cable Length | 1m |
| Operating Voltage | 5V |
| Low Pressure Sensor | Pressure Connection: G1/4 |
| Response Time | ≤1ms |
| Measuring Range | 0-1.2MPa |
| Weight | 120g |
| Dimensions | 30mm*30mm*50mm |
| Barometric Pressure Sensor | MAP pressure sensor |
Oetex MAP Pressure Sensor is a low pressure sensor with a response time of ≤1ms. Its measuring range is 0-1.2MPa and comes with a 1-year warranty and a 1m cable length. It is suitable for measuring atmospheric pressure or vacuum pressure in a variety of applications.
Oetex MAP Pressure Sensor is perfect for applications that require precise and fast low pressure measurements. Its fast response time and high accuracy make it the ideal choice for monitoring changes in atmospheric pressure or measuring vacuum pressure in a variety of applications.
Oetex MAP Pressure Sensor provides reliable and accurate measurements in a wide range of environments and applications, making it the perfect choice for a variety of industrial and commercial applications. Whether you need to measure atmospheric pressure, vacuum pressure, or any other low pressure, Oetex MAP Pressure Sensor has you covered.
MAP Pressure Sensor - Oetex
MAP pressure sensor provides technical support and service for its customers:
MAP pressure sensor Packaging and Shipping:
Q1: What is the brand name of the MAP Pressure Sensor?
A1: The brand name of the MAP Pressure Sensor is Oetex.
Q2: What is the pressure range of the MAP Pressure Sensor?
A2: The MAP Pressure Sensor has a pressure range from 0 to 6 bar.
Q3: What is the accuracy of the MAP Pressure Sensor?
A3: The accuracy of the MAP Pressure Sensor is ±0.5%.
Q4: What is the temperature range of the MAP Pressure Sensor?
A4: The MAP Pressure Sensor has a temperature range from -20°C to
85°C.
Q5: What is the power supply of the MAP Pressure Sensor?
A5: The MAP Pressure Sensor operates with a 10-30 VDC power supply.
